World Journal of Engineering 
Content Issue  2004-2009

Back to mainpage  Contact us


World Journal of Engineering, sponsored by Hebei University of Engineering,

Department of Mining and Geological Engineering, University of Alaska

Fairbanks, Loughborough University, Kharkov State Technical University of

construction and Architecture, is a academic journal about Civil Engineering,

Material Engineering, Mechanical and Electronic Engineering, Geotechnical and

Mining Engineering, and other engineering.

               

              

                                   

Current Issue

电子版全文下载网址:

http://www.wjoe.org/     

信息查询网址:

http://wjoe.hebeu.edu.cn/

2004  1-2

 No. 1

Simon S Wang, Xiaohu Wang and Joseph Loughlan. Active control of transient vibration of thin-walled composite beams. World Journal of Engineering, 2004, 1(1): 1-17.

 Zheng Liyun, Zhao Lixin, Wan Yizao, Wang Yulin, Xiong Weihao. Preparation and properties of three dimensionally braided carbon fiber-reinforced nylon composites. World Journal of Engineering, 2004, 1(1): 18-24.

 DSc. D. Goncharenko. The restoration of Orthodox Churches in Slobozhanschina, Ukraine. World Journal of Engineering, 2004, 1(1): 25-34.

 Zhang Jie Zhang Weijie Wang Jinggang Xu Tongmo. Numerical simulations of flow field and temperature field in a room with Mixed Convection. World Journal of Engineering, 2004, 1(1): 35-40.

 Jiangong Liu, Guimei Wang  and Yang Liu. Electromagnetic speed regulation technology of shearer. World Journal of Engineering, 2004, 1(1): 41-49.

 Changshou Sun and Gang Chen. Time-dependent analysis of underground opening stability. World Journal of Engineering, 2004, 1(1): 50-64.

 Tao Zhu, Abhijeet S. Kulkarni, Steve Meurer, and Hong Liang. Kinetics of carbon deposition for natural gas transportation under high temperature. World Journal of Engineering, 2004, 1(1): 65-74.

 Xujin Bao, Min Lin, Hwee Zhen Koh and Qiuyu Zhang. Preparation of magnetic nanocomposition via water-in-oil. World Journal of Engineering, 2004, 1(1): 75-81.

 Tao Zhu and Scott Bailey. Microorganism triggered biopolymer gels for permeability modification in petroleum reservoirs. World Journal of Engineering, 2004, 1(1): P82-90.

 Ding Shuli, Liu Qinfu, Peng Suping. Occurrence of vaterite(μ-Ca2CO3 in the scale of pump oil well, Daqing oilfield, Northeast China. World Journal of Engineering, 2004, 1(1): 91-100.

 No. 2

Nazar B .H. Abdelkarim and Salah S.Ibrahim. Numerical study of the effects of initial conditions on gasoline fuel spray. World Journal of Engineering, 2004, 1(2): 1-7.

 Wenhua Chen,Yun Li. Automatic loop-shaping in quantitative feedback theory using genetic algorithms. World Journal of Engineering, 2004, 1(2): 8-17.

 XiuCin Hu,Qinyun Dai,Yunyu Zhang. The capacity of wireless ad hoc network (based on the network flow theory) . World Journal of Engineering, 2004, 1(2): 18-22.

 Zhongguo (John) Ma. Impact of allowable stresses on maximum usable concrete strength levels of bridge I-girders. World Journal of Engineering, 2004, 1(2): 23-31.

 Simon S.Wang. Towards the answer to the second part of Hilbert's 16th problem. World Journal of Engineering, 2004, 1(2): 32-40.

 J.S.Yang and X.M.Yang. Electric field gradient effectand thin film capacitance. World Journal of Engineering, 2004, 1(2): 41-45.

 Jinjun Zhang,Yang Zhang,Furong Li. Aspect-oriented modeling for distributed software architecture. World Journal of Engineering, 2004, 1(2): 46-52.

 Debasmita Misra,Terril E.Wilson,Wei Zhou,Abhijit Dandekar and Neil D'Cunha. Controll of spilled petroleum in a terrestrial environment using activated coal Phase I-at ambient indoor conditions. World Journal of Engineering, 2004, 1(2): P53-66.

 Veijo Kauppinen. Drilling of hard materials using solid carbide tools. World Journal of Engineering, 2004, 1(2): 67-73.

 Yuzhuang Sun,Jianping Chen,Wei Liao,Jialai Lu and Hongjian Zhang. Formation and distrobution of polycyclic aromatic sulfur compounds in the. World Journal of Engineering Kupferschiefer from Poland and Germany, 2004, 1(2): 74-92.

 Shuwen li, Xiujian Zhao,Weihua Yang,Jianwu Shi,Tingting Bai and Haibo Lv. A Forecast for groundwater pollution in the chemical industry(a district of Xingtai city)  using the finite element method. World Journal of Engineering, 2004, 1(2): 93-102.

 2005  1-4

 No. 1

Min An,Chris Baker and Jiaohao Zeng. A fuzzy-logic-based approach to qualitative risk modelling in the construction process. World Journal of Engineering, 2005, 2(1): 1-12.

 Jiangong Liu, Guimei Wang,Yang Liu and Yanhong Zhang. Research and application of the electromagnetic-speed-regulator motor and electric shearer. World Journal of Engineering, 2005, 2(1):13-17.

 Liyun Zheng,Weihao Xiong and Xianmei Yan. A new hybird coating process of cermets through melt infiltration and nitridation. World Journal of Engineering, 2005, 2(1): 18-24.

 Xiaogang YangX.Huang and N.H.thomas. A dominant scaling parameter group for dispersive transprot in turbulent two-phase free shear flows. World Journal of Engineering, 2005, 2(1): 25-37.

 V. Corobceanu, D. Covatarou and R. Giusca. Use of preheated components or freshly mixed concrete accelerate strength development. World Journal of Engineering, 2005, 2(1): 38-46.

 Changshou Sun and Gang Chen. Fuzzy cluster analysis and classification of skarn distribution for underground mine groud control. World Journal of Engineering, 2005, 2(1): 47-56.

 Jinkui Li, Shihai Cui,Yanghong Zhang and Lei Yan. Analysis study of the surrounding rock in the pump station in Wannian mine. World Journal of Engineering, 2005, 2(1): 57-68.

 Neil John D' Cunhua and Debasmita. A review of enhanced remediation methods for subsurface dense non-aqueous phase  liquids spills employing permeability modification. World Journal of Engineering, 2005, 2(1): 69-80.

 Rongao,Baozheng Wang and Shengbing He. The eco-pond system at Dongying city. World Journal of Engineering, 2005, 2(1): 81-87.

 Changjiang Zhu,Shuwen Li,Fuhai  Liu  ,Wehua,Yang and Jihong Zhou. Applying a combined gray-neural network to the dynamic prediction of groundwater lever. World Journal of Engineering, 2005, 2(1): 88-94.

 Wei Dong and Qingnian Zhang. Uniqueness of boundry blow-up solution on an exterior domain of Rn. World Journal of Engineering, 2005, 2(1): 95-102.     

 No. 2

Min An,WanChang Lin and Alan stirling. Railway safty risk assessment using fussy reasoning approach. World Journal of Engineering, 2005, 2(2): 1-15.

 Beddar Miloud. An experimental study of the porosity and permeability of steel-fiber reinforced concrete. World Journal of Engineering, 2005, 2(2): 16-25.

 Yuantai Hu, Jiashi Yang, Shunong Jiang and Qing Jiang. Analysis of a thickness-sheer crystal resonator in a circular cylindrical shell as a presure sensor. World Journal of Engineering, 2005, 2(2): 26-32.

 Jian Yang and Jianqiao Ye. Bending, buckling and vibration of  plates strengthend with bonded composite sheets. World Journal of Engineering, 2005, 2(2): 33-42.

 Feng Gao, Tingkuan Chen, Yushan Luo  and Changjian Zhang. Research on the pressure drop oscillation in inclined and parallel long pipes. World Journal of Engineering, 2005, 2(2): 43-49.

 Xiaogang Yang, Xiaobing Huang, Joe Tatler and John Campbell. Enhancement of casting  reliability by optimising the runner systems. World Journal of Engineering, 2005, 2(2): 50-69.

 Hongwei Zhang. Controller performance monitoring of batch/fed -batch fermentation processes using multivariate   statical process control methods. World Journal of Engineering, 2005, 2(2): 70-80.

 Djebbar Tiab, Tao Zhu, Saadi Manseur and Hemant Phale. Horizontal and vertical permeability determination in clean and shaly reservoirs using well-log data. World Journal of Engineering, 2005, 2(2): 81-95.

 Simin Li, Yanhong Zhang, Qingmei Meng and Fuqin Li. Mechanism and purifying function of biological quartz sand pool in treating  micro-polluted  raw water. World Journal of Engineering, 2005, 2(2): 96-102.

 No. 3

Y. Shang, R. Chen and Thring. The concentration of sodium borohydride hydrolysis system used for compact hydrogen storage. World Journal of Engineering, 2005, 2(3): 1-9.

 Min An. A review of design and maintenance for railway safety-the current status and future aspects in the UK railway industry. World Journal of Engineering, 2005, 2(3): 10-22.

 Rui Chen. Controlled auto ignition and its combustion mechanism. World Journal of Engineering, 2005, 2(3): 23-49.

 Guimei Wang, Lijie Yang, Nan Duan and Jiangbo Li. Developing an explosion-proof cable-roller product using virtual prototype technology. World Journal of Engineering, 2005, 2(3): 50-55.

 Xuemei Liu, Shusheng Zhang and Zhongmin Huangpu. Geometric features extraction using real-value genetic algorithm. World Journal of Engineering, 2005, 2(3): 56-62.

 Yuantai Hu ,Jiashi Yang, Zhijian Cui, Shunong Jiang and Qing Jiang. Effects of biasing fileds on electromechanical coupling factors. World Journal of Engineering, 2005, 2(3): 63-69.

 Debasmita Misra, Liviu Tomutsa, Xingde Dai and Navin Twarakavi. Upscaling of hydrological properties using wavelet transforms. World Journal of Engineering, 2005, 2(3): 70-81.

 Weimin Liu, Qingcheng Bi, Jie Zhang, Yajun Guo and Feng Gao. Study on water droplet ice-making by water spray in winter and utilizing in summer. World Journal of Engineering, 2005, 2(3): 82-88.

 Debasmita Misra, Richard A.Schatzinger and Thomas Oommen. Use of modal and geostatistical analysis of outcrop analog to assess the lateral variability of geohydrological parameters. World Journal of Engineering, 2005, 2(3): 89-103.     

 No. 4

Jianqiao Ye. Eigenvalues of a constrained dynamics stiffness matrix. World Journal of Engineering, 2005, 2(4): 1-8.

 Razvan Giusca and Vladimir Corobceanu. The engineering of strengthing procedures for reinforced concrete walls. World Journal of Engineering, 2005, 2(4): 9-24.

 V.A.Voblich, D.F.Goncharenko and O.V.Kichaeva. Strength deterioration and renewal of reinforced concrete piping. World Journal of Engineering, 2005, 2(4): 25-33.

 Jiashi Yang. An ill-posed problem in elasticity. World Journal of Engineering, 2005, 2(4): 34-36

K.Mao. A numerical simulation of muti-layer coated real surface contact mechanics. World Journal of Engineering, 2005, 2(4): 37-44.

 Ruizhen Gao, Yang Sun and Hua Zhang. An improved niching genetic algorithm for the optimal design of multibody model-based vehicle suspensions. World Journal of Engineering, 2005, 2(4): 45-53.

 Debasmita Misra, Liviu Tomutsa, Xingde Dai and Navin Twarakavi. CODcr mensuration of element sulfur in mixed phase. World Journal of Engineering, 2005, 2(4): 54-58.

 Chenxi Nie and Wei Nie. Analasis on the industry competive power variation of Handan city. World Journal of Engineering, 2005, 2(4): 59-68.

 Jianying  Gong, Tieyu Gao and Xiuling Yuan. Problem review of air source heat pumps. World Journal of Engineering, 2005, 2(4): 69-79.  

 Renhu Tang, Huixiong Li and Tingkuan Chen. New concept of once -through boiler with vertical water wall. World Journal of Engineering, 2005, 2(4): 80-85.

 Horacio Toniolo and Prathap Kodial. Role of ice jams in transverse rib formation. World Journal of Engineering, 2005, 2(4): 86-92.

 Djebbar Tiab, Tao Zhu, Noureddine Rahmouni and Hemant Phale. Evaluation of hydraulic fracturing and re-entries in the hassi-messaoud field, Algeria. World Journal of Engineering, 2005, 2(4): 93-102.

 2006  1-4

No. 1

S.S. Ibrahim, A.M.S. Ali, J.A. El-Rimawi and A.R. Masri. A numerical study of compressible flow interactions with solid walls in a premixed combustion chamber. World Journal of Engineering, 2006, 3(1): 1-7.

 K. Mao, C. J. Hooke and D. Walton. High performance polymer composite gear and its design. World Journal of Engineering, 2006, 3(1): 8-17.

 L.J. Wang and A.S.M. Sajeev. User interface design for multiple device applications. World Journal of Engineering, 2006, 3(1): 18-31.

 Lijun Zhang, Shengdun Zhao, Wei Liu and Chunjian Hua. Mechanism of a precision cropping system with the variable-frequency vibration method. World Journal of Engineering, 2006, 3(1): 32-41

 Zeghichi Leila and Mezghiche Bouzidi. The effect of replacement of natural aggregates by slag products on the concrete strength. World Journal of Engineering, 2006, 3(1): 42-48.

 A. Bellaouar, A.F. Boudjabi and V. Pavel. A new approach for the estimation of dead volume in continuous casting tundishs. World Journal of Engineering, 2006, 3(1): 49-57.

 Simon S. Wang and Giovanni Tosi. Limit cycles in Liénard equations. World Journal of Engineering, 2006, 3(1): 58-76.

 Xiangsheng Li and Zhenping Feng. Numerical study on combustion instability induced by equivalence ratio disturbance in a swirl type combustor. World Journal of Engineering, 2006, 3(1): 77-88.

Weiyang Wang, Tingkuan Chen, Yushan Luo and Feng Gao. Hydrodynamic behavior of two-phase oil-water flow in vertical pipes. World Journal of Engineering, 2006, 3(1): 89-96.

 JiHong Zhou, Yanjun LianChangjun Zhu, Yadong Qu, Weiihua Yang, and Xiujuan Zhao. The desulfurizing capacity of activated carbon and regenerated activated carbon. World Journal of Engineering, 2006, 3(1): 97-102.

 No. 2

 Yuriy Vagapov and Roustiam Chakirov. Off-line estimation of squirrel cage induction motor parameters using a step voltage response. World Journal of Engineering, 2006, 3(2): 1-8.

 Abdelouahab Zaatri and Abdelhakim Cherfia. Implementation of a supervised intelligent function on a mobile manipulator robot. World Journal of Engineering, 2006, 3(2): 9-19.

M. Benidir, R. Chaïb and I.Verzea. The experience feedback for the management of the technical system maintenance: analysis and synthesis of the data. World Journal of Engineering, 2006, 3(2): 20-26.

 Xiangsheng Li and Zhenping Feng. Numerical study on combustion instability induced by equivalence ratio disturbance in a swirl type combustor. World Journal of Engineering, 2006, 3(2): 27-35.

Sheng Huang, Min An and Chris J Baker. FRA and FAHP approaches to risk analysis - a case study. 2006, 3(2): 36-60.

Muhammad Naseem Baig, Fan Jiansheng and Nie Jianguo. A concise study on properties of short CFT and DSCFT columns including hollowness, ductility and strength of DSCFTs. World Journal of Engineering, 2006, 3(2): 61-69.

                     

Muhammad Naseem Baig, Jiangguo Nie and Jiansheng Fan. Role of concrete filled tubular and double skinned concrete filled tubular columns in retrofitting of bridge columns. World Journal of Engineering, 2006, 3(2): 70-79.

 

Hongya Niu, Yuzhuang Sun and Hantao Cui. Fuzzy pattern recognition method on the evaluation of indoor environments. World Journal of Engineering, 2006, 3(2): 80-85.

                               

Shuli Ding, Hei Song and Qinfu Liu. The effect of mechanical grinding on kaolinite structure and thermal behavior. World Journal of Engineering, 2006, 3(2): 86-90. 

 

Lite Zhang, Tieyu Gao and Qingfeng Xia. Condition analysis of the steady gas-gas interface existence and the separation of gas and solid in supersonic gas phase flows. World Journal of Engineering, 2006, 3(2): 91-102.

 No. 3

 X. Yang, B. Chen, X. Huang, L. Li, Z. Zouaoui1 and C.D. Rielly. Effect of two-way coupling on condensed bubble laden shear flows. World Journal of Engineering, 2006, 3(3): 1-13.

 Y Shang, R Chen and R. Thring. Hydrolysis of sodium borohydride-a potential compact hydrogen storage method. World Journal of Engineering, 2006, 3(3): 14-26.

 

Tinggang Zhang. A physically based multiaxial constitutive model for single crystal ice and its application. World Journal of Engineering, 2006, 3(3): 27-42.

                               

Abdelghani Naceri and Ibrahim Messaoudene. The chemical and physical effects of the granulated blast furnace slag on concrete compressive strength. World Journal of Engineering, 2006, 3(3): 43-51.

 

Smail Benissaad1, Mohamed Afrid. Three dimensional numerical study of the double diffusion natural convection in cooperation case. World Journal of Engineering, 2006, 3(3): 52-63.

 

B. Mezghiche, L. Zeghichi, R. Chebili and M. Mellas. Curing methods of precast concrete elements. World Journal of Engineering, 2006, 3(3): 64-69.

                              

Hua Liu, Shanlin Kang, Wei Liao and Songhua Shen. Temperature monitoring for asynchronous motor based on wavelet network and parameter identification. World Journal of Engineering, 2006, 3(3): 70-76.

 

Yisong Dou, Ying Qi, Meng Hu and Jian Wu. Standardization of China engineering construction. World Journal of Engineering, 2006, 3(3): 77-86.

 

Mohammed Alauddin and B. C. Basak. Development of an expansion transition in open channel subcritical flow. World Journal of Engineering, 2006, 3(3): 87-95.

 

Lihong LiQingbin An, Shaorui Jia, Xiaojin Ma and Xin Zhao. Algorithm of license plate location based on the combination of color image and gray image. World Journal of Engineering, 2006, 3(3): 96-102.

 

No. 4

 

Zhang Hongwei, Brian Klaveness and Yuriy Vagapov. Least square support vector machine based soft-sensing for fed-batch yeast fermentation -A comparative study. World Journal of Engineering, 2006, 3(4): 1-8.

 

F. Wang, Q. Zhu and J. Lin. Prediction of spatial variation of microstructural evolution in hot rolling. World Journal of Engineering, 2006, 3(4): 9-18.

 

Lohtander Mika, Salminen Tuomas and Varis Juha. Collecting manufacturing data and questions related to data collection. World Journal of Engineering, 2006, 3(4): 19-24.

  

A. Bellaouar, A. F. Boudjabi and M. Lachi. Influence of the argon purging in the tundish on the non-metallic inclusion sizes: mathematical model. World Journal of Engineering, 2006, 3(4): 25-28.

 

M. Chadli, M.Mellas and A. Mamache. Portal frame of reinforced concrete. World Journal of Engineering, 2006, 3(4): 29-35.

 

Delia Anne-Marie Androne, Adriana-Elena prisacaru and I. Anddrone. Electromagnetic signature antenna for ore bed exploration. World Journal of Engineering, 2006, 3(4): 36-43.

 

Mengxiao Liu. Bubbles or real growth -Analysisi of the determinants on housing price growth rates in Shanghai. World Journal of Engineering, 2006, 3(4): 44-53.

 

Boudchicha Abdelaziz, Cheikh Zouaoui Mustapha, Gallias Jean-Louis and Mezghiche bouzidi. Effects of mineral admixtures on mortars: application of the predictive model of bolomey with the concept of equivalent binder. World Journal of Engineering, 2006, 3(4): 54-65.

 

Matin Katawaluwa, Yuriy Vagapov, Roustiam Chakirov and Ismael Ei Mahi. A model of heat generator driven by vertical axis wind tuebine. World Journal of Engineering, 2006, 3(4): 66-75.

 

Smail Benissaad, Mohamed Afrid and Zoubir Nemouchi. Numerical study of the opposing three dimensional thermosolutal natural convection. World Journal of Engineering, 2006, 3(4): 76-87.

 

R. Chaib, M. Benidir and I. Verzea. Risks evaluation in a company: case of engines and trators factory. World Journal of Engineering, 2006, 3(4): 88-94.

 

Dongdong Zhao, Yuzhen Dong, Ji Zheng, Jingjun Zhang and Ruizhen Gao. Application of Improved Genetic Algorithms for Sensor and Actuator Placement of Active Flexible Structures. World Journal of Engineering, 2006, 3(4): 95-102.

 

2007  1-4

 

No. 1

 

Sergey Abramov and Cedric Belloc. Real-time simulation and performance analysis of a fuel cell stack. World Journal of Engineering, 2007, 4(1): 1-13.

 

Abdelhakim Cherfia and Abdelouahab Zaatri. Analysis of constrained parallel robot workspace. World Journal of Engineering, 2007, 4(1): 14-21.

 

R. Chaib, A.Benretem, S.Teyar and I. Verzea. Management of maintenance by vibratory analysis case: a planetary reducer. World Journal of Engineering, 2007, 4(1): 22-27.

 

Mohamed Larbi Benmalek, Abderrahim Bali and Michèle Queneudec T’kint. Thermal performances of wood eco-concretes. World Journal of Engineering, 2007, 4(1): 28-37.

 

Xinpei Jiang and Zichen Deng. Optimization of concrete mix based on artificial neural network and simulated annealing. World Journal of Engineering, 2007, 4(1): 38-44.

   

Guettala, S., Mezghiche, B., and Chebili, R. Interest and effectiveness of the addition of the sand of dune finely crushed to cement, on the properties of the concrete. World Journal of Engineering, 2007, 4(1): 45-53.

 

Djamel Hamadi, Mekki Mellas, Rachid Chebili and Mohamed Salah Nouaouria. An efficient quadrilateral membrane element for civil engineering analysis. World Journal of Engineering, 2007, 4(1): 54-65.

 

Vladimir Corobceanu and Răzvan Giuşcă. Durability of thermally treated concretes. World Journal of Engineering, 2007, 4(1): 66-78.

 

Weishu Wang , Weihui Xu, Fei Yin, Tingkuan Chen, Weimin Liu and Yushan Luo. Experimental study of heat transfer to water flowing in inclined tubes. World Journal of Engineering, 2007, 4(1): 79-88.

 

Yousfi Khemissi and Ahmed M.Nahas. Sliding Mode Control of nonlinear Systems using model-error control. World Journal of Engineering, 2007, 4(1): 89-94.

 

Decai Yu, Wenjuan Cao, Wenping Hu and Xinmin Wang. Equilibrium cosmic abundance of the elements and relationship between gravitational potential and Electrostatic potential. World Journal of Engineering, 2007, 4(1): 95-102.

 

No. 2

 

A. Mekround, A. Bouchouchal and H. Zaidi. Influnce of alternate magnetic field on thermo-mechanical behavior and characterization of sliding couple brass/XC48 steel. World Journal of Engineering, 2007, 4(2): 1-9.

 

B. Taalah and A. Guettala. Effect of hot weather on the properties of fresh and hardened concrete. World Journal of Engineering, 2007, 4(2): 10-19.

 

B. Benammar, B. Mezghiche, M. Mellas and S. Guettala. Natural treatment of concretes by protection or watering. World Journal of Engineering, 2007, 4(2): 20-28. 

 

Abdelghani Naceril  and Mounir Benia. Particle size distribution and specific surface area analysis of cements with various mineral admixtures. World Journal of Engineering, 2007, 4(2): 29-38.

 

F. -Z. Zendaoui, A. Zaatri, M. O. Mahmoudi and R. Ouiguini. Tele-operation experiments for task manipulation through internet. World Journal of Engineering, 2007, 4(2): 39-44.

 

Ahmed Abdallah. Geotechnical investigation, analysis and construction management of tunnel infrastructure systems as a tool for     scheduling and cost estimation. World Journal of Engineering, 2007, 4(2): 45-54.

 

M. Baheddi, M. D. Djafarov and Charif. Design method of  flexible continuous footings on swelling clayed soils. World Journal of Engineering, 2007, 4(2): 55-67.

 

Y. Z. Sun, W. W. Jiao, and J. S. Fan. Organic pollution of Handan iron and steel Co. LTD. in Handan city, China. World Journal of Engineering, 2007, 4(2): 68-78.

 

X. H. Lu, G. Q. Zhang, N. Ma, Q. B. Guo, D. Han and Z. Y. Tang. Research of spinel LiMn2O4 electrochemical performance by doping Co3O4, La2O3, LiF. World Journal of Engineering, 2007, 4(2): 79-84.

 

A. R. Messai, A. Bennia and S. Aris. New method in quantum detection systems. World Journal of Engineering, 2007, 4(2): 85-93.

 

M. G. Li, M. Wang and Y. Li. Manufacturing an execution system for the paper industry based on simaticit. World Journal of Engineering, 2007, 4(2): 94-102.                   

 

 

No. 3

 

Julien Aymeric Beauquel Xiaogang Yang ,Benjamin Albarea and Hastings Mckenzie. Numerical modelling of steady flow inside a spark ignition engine cylinder. World Journal of Engineering, 2007, 4(3): 2-18.

 

Julien Aymeric Beauquel and Xiaogang Yang. CFD modelling of transient flow inside a spark ignition engine cylinder. World Journal of Engineering, 2007, 4(3): 19-29.

 

Benjamin  Albarea, Julien Aymeric Beauquel, Hastings Mckenzie and Xiaogang Yang. 3D PRE-CFD modelling of the inlet ports and the top part of the combustion chambers of a SI engine using digitization. World Journal of Engineering, 2007, 4(3): 30-35.

 

Zoubir Zouaoui, Karim Mechiche and Hastings Mckenzie. A genetic algorithm besed fault detection and isolation design for a flight control system. World Journal of Engineering, 2007, 4(3): 36-42.

 

Zoubir Zouaoui, Dexter Rozario, Lydie Szkatula and Hastings Mckenzie. Supersonic engine inlet design for boundary layer reattachement. World Journal of Engineering, 2007, 4(3): 43-50.

 

Roustiam Chakirov and Yuriy Vagapov. Fail-silent behavior of permanent magnet synchronous drives with field oriented control. World Journal of Engineering, 2007, 4(3): 51-57.

 

D.Estruch and M.Elsari. Aerodynamic pre-spinning of the wheels of aircrafts to reduce tyre wear at touchdown. 2007, 4(3): 58-65.

 

Y.Hu. A CPLD based fast controller for DC link voltage regulation. World Journal of Engineering, 2007, 4(3): 66-72.

 

M.Elsari, A.Cummings and R.Grant. Experimental investigation of the bulk acoustic properties of sound absorbing material. World Journal of Engineering, 2007, 4(3): 73-86. 

 

Laul Osei-Owusu,Rui Chen and Salah Lbrahim. Calculation of the pre-ignition temperature field in an HCCL engine. World Journal of Engineering, 2007, 4(3): 87-102.

 

 

No. 4

 

A. Benretem, D. Khalfa and M. Benidir. Determination of centrifugal pump characteristics in solid liquid mixture. World Journal of Engineering, 2007, 4(4): 1-6.

 

A. Yokoi and J.Sugishita. Influence of V substiution for Nb on polarization properties of mixed bismuth layer-structured Bi7Ti4.375Nb0.25 W0.375O21 ceramics. World Journal of Engineering, 2007, 4(4): 7-14.

 

F.Mebarek-Oudina and R.Bessaih. Magnetohydronamic stability of natural convection flows in Czochralski crystal growth. World Journal of Engineering, 2007, 4(4): 15-22.

 

W.H.Dong.Z.H.Deng and D.H.Liu. Simulation Research on the stability problem of hydroelectric station penstock under external pressure. World Journal of Engineering, 2007, 4(4): 23-28.

 

H. Ito,A.Yokoi and J.Sugishita. Lubricating properties of plant-viscous fluid in abelmoschus manihot. World Journal of Engineering, 2007, 4(4): 29-34.

 

K.Hanamura,A.Yokio and J.Sugishita. Polarization properties of and phase transition of Sr0.5Bi2.25Na1.25Nb3O12 ceramic by high -temperature X-ray powder diffraction. World Journal of Engineering, 2007, 4(4): 35-41.

 

S. M.Li and Y.P.Li. Comparison studies on micro-polluted sourcewater treatment by ozone combined processes following bio-pretreatment. World Journal of Engineering, 2007, 4(4): 42-51.

 

X. Yang, C. D. Rielly, L. Li and X. Huang. Experimental study on bubble entrainment by a burgers vortex. 2007, 4(4): 52-81.

 

A. Lahmar, T. Benmansour and L. Bensmail. Study of stiffened coupled shear walls supported on rigid foundations, under wind action. World Journal of Engineering, 2007, 4(4): 82-92.

 

C. J. Zhu, J. L. Zhang,  E.H. Jiang, P. Zhang, J.H. Zhou and X.J. Zhao. Application of organic gray neural network model in river water quality prediction. World Journal of Engineering, 2007, 4(4): 93-98.

 

M. Benabid, M. F. Ghorab, A. Djebaili. Cadmium as environmental pollutant Study of Evolution of cadmiun, its effects on beans (Phaseolus Vulgaris) and its interaction with zinc. World Journal of Engineering, 2007, 4(4): 99-103.

 

 2008 1-4

 

No.1

 

F. Berrahil and R. Bessaïh. Magnetohydrodynamic stability of oscillatory natural convection in a cylindrical enclosure filled with a liquid metal. World Journal of Engineering, 2008, 5(1): 1-9.

 

J. Cai , J. Lin 1, J. Wilsius  and T.A. Dean. Austenitization mechanisms and modelling methods for steels. World Journal of Engineering, 2008, 5(1): 10-20.

 

Elena V. Chepelyuk, David Hui and Yuri Strzhemechny. Analysis of pore size distribution in the woven fabric 2D. World Journal of Engineering, 2008, 5(1): 21-34.

 

H.H.Ge and J.Y.Xu. Identification of the boundary conditions for plates on elastic foundation by boundary element method. World Journal of Engineering, 2008, 5(1): 35-40.

 

Zhijun Li and Zichen Deng. Discrete-time variable structure control of buildings with fuzzy adaptive regulation of reaching law. World Journal of Engineering, 2008, 5(1): 41-49.

 

Dongsheng Wang, Guimei Wang , Weiwei Pan and Yutian Wang. A fiber thermal sensor based on phase-lock loop and fast fourier transform. World Journal of Engineering, 2008, 5(1): 50-55.

 

Marina Malinina and Michael Gasik. Formation of spinels on ferritic stainless steels surface at high-temperature oxidation. World Journal of Engineering, 2008, 5(1): 56-62.

 

S. Salmi, S. Haddad and M. Benslama. Performance study of a code division multiple access protocol for LEO constellations. World Journal of Engineering, 2008, 5(1): 63-70.

 

Guimei Wang, Shenghai Wang and Qingdong Wang. Recovery of waste electrical and electronic equipment. World Journal of Engineering, 2008, 5(1): 71-83.

 

Feng Li, Shuxia Yang and Yu Wen. Integration and reconstruction of regional architecture the sustainable development of caves in northern Shaanxi. World Journal of Engineering, 2008, 5(1): 84-89.

 

Cunliang Zhao and Yuzhuang Sun. Rare earth elements of Coal Seam 5 from Gequan MineXingtai Coalfield. World Journal of Engineering, 2008, 5(1): 90-94.

 

Shengqin Huang, Zhenxia Liu, Yaguo Lu and Yan Yan. Slip factor correlations for mixed-flow impeller. World Journal of Engineering, 2008, 5(1): 95-100.

 

Y. Z. Sun, S. J. Qin, P. Wang, K. K. Jin and J. L. Lu. Exoremental study of earlier formation processes of macerals. World Journal of Engineering, 2008, 5(1): 101-102.

 

No.2

 

T.G. Zhang. Automation in forming constitutive of linear elastic foams. World Journal of Engineering, 2008, 5(2): 1-10.

 

Z.J. Li and Z.C. Deng. Discrete-time variable structure control of building structures using fuzzy logic and forecasting algo rithms. World Journal of Engineering, 2008, 5(2): 11-22.

 

Y.Z. Liu, X. X. Zha and M. Yu. Finite element analysis of influence factors on electrochemical chloride removal from concrete (1). World Journal of Engineering, 2008, 5(2): 23-33.

 

M. Zaouil and A. Bouchoucha. Influence of heat treatment on brittle fracture welding cords of constructional steels. World Journal of Engineering, 2008, 5(2): 34-40.

 

Y.X. Qu and X. X. Zha. Numerical modeling to simulate the concrete spalling when it is exposed to fire. World Journal of Engineering, 2008, 5(2): 41-51.

 

S.J. Wang and M.F. Liao. A controllable elastic support/dry friction damper for vibration control of rotor systems. World Journal of Engineering, 2008, 5(2): 52-58.

 

M. Battira and R. Bessaih. Oscillatory three-dimensional natural convection in a rectangular cavity of liquid metal under magnetic field. World Journal of Engineering, 2008, 5(2): 59-64.

 

Khalid A. Al-Dheylan Low velocity impact failure micromechanisms of 6061 aluminum reinforced with submicron Al2O3 metal matrix composites. World Journal of Engineering, 2008, 5(2): 65-70.

 

G.Q. Zhang, X.H. Lu, L.Q. He and L. Bian. The synthesis and properties of the urea modified polyaminamide epihalohydrin resin World Journal of Engineering, 2008, 5(2): 71-75.

 

M. Kherouf, R. Mansouri and M.Guenfoud. Analysis of sediment contamination in the harbour of Skikda. World Journal of Engineering, 2008, 5(2): 76-81.

 

T. Guimer, M. Mellas, B. Mezghiche and A. Guettala. Contribution of the mineral addition on the characteristics physico of the binders and mortars. World Journal of Engineering, 2008, 5(2): 82-87.

 

B. C. Basak and Mohammed Alauddin. Efficiency of an expansion transition in open channel subcritical flow. World Journal of Engineering, 2008, 5(2): 88-94.

 

C.J. Zhu, Z.C. Hao, J.H. Zhou, X.J. Zhao and W.H. Yang. Experiment and numerical simulation of contaminant transport in low permeability porous media. World Journal of Engineering, 2008, 5(2): 95-99.

 

Abdelouahab Zaatri. Virtual environment modeling from images for telerobotics applications. World Journal of Engineering, 2008, 5(2): 100-104.

 

No.3

 

ICCE-16 KEYNOTE

 

Vladimir Cech. Plasma Polymer Films: from Nanoscale Synthesis to Macroscale Functionality. World Journal of Engineering, 2008, 5(3): 1-4.

 

Tai Yan Kam, S.J. Wang and T.H. Chiang. Elastrained Composite Plates-Analysis Applications. World Journal of Engineering, 2008, 5(3): 5-7.

 

Masamichi Kohno, Shinji Kawauchi, Takuto Otofuji, Yoshihiko Matsuyuki Takata and Mon-Tues. Laser Micro/Nano-Machining With a Bessel Beam. World Journal of Engineering, 2008, 5(3): 8-10.

 

L. Hui and J.P. Ou. Nano-Materials and Carbon Fiber Reinforced Concrete and its Smart Properties. World Journal of Engineering, 2008, 5(3): 11-13.

 

Takahiro Namazu. Micro/Nanoscale-Materials for MEMS Applicatins-Al/Ni Exothermic Reactive Film as a Heat Source for MEMS Packaging. World Journal of Engineering, 2008, 5(3): 14-17.

 

J.H. Peng, S.H. Guo, G. Chen, L.B. Mao and S.M. Zhang. Pilot-Scale Experimental Study on the New Technolgy of Cao-Psz by Microwave Heating. World Journal of Engineering, 2008, 5(3): 18-21.

 

K. Sun. Preparation of Carboxyl-Ended Polymer Microsoeres and their Multifunctionalization. World Journal of Engineering, 2008, 5(3): 22-24.

 

Jose M. Torralba, Elisa M. Ruiz Navas, E. Gordo and Joao B. Fogagnolo. High Performance Mmc’s Obtained by Powder Metallurgy. World Journal of Engineering, 2008, 5(3): 25-27.

 

Stan Veprek. Super- and Ultrahard Nanocomposites Coatings: Past, Present and the Future. World Journal of Engineering, 2008, 5(3): 28-30.

 

X.X. Wei. Analytical Solutions for Inhomogeneous Strain Fields within Sil-Xgex Alloy and Effect on its Quantum Behavior of Electronic Band Structure. World Journal of Engineering, 2008, 5(3): 31-34.

 

C.P. Wong, W. Lin, R. Zhang, Z. Liang, J. Lu, H. Xiu and K. Moon. Nano Materials for Microelectronic and Photonic Packaging. World Journal of Engineering, 2008, 5(3): 35-37.

 

D.Y. Wu and Sam Meure. Research and Development of Self-Healing Polymeric Materials- an Overview. World Journal of Engineering, 2008, 5(3): 38-40.

 

BIO COMPOSITES

 

F.N. Chang and J.P. Chen.. HAP/Chitosan Composites Membrane for Encapsulation and Immunoisolation of Islet Cells. World Journal of Engineering, 2008, 5(3): 41-42.

 

Vandana Dubey, P. Dubey, Ajay Singh and J.M. Keller. Effect of Plastic Material in Health and Hygiene. World Journal of Engineering, 2008, 5(3): 43-44.

 

Shaban Abdou. Finite Element Stress Analysis of Composite Pelvic Bone Under Static Loading. World Journal of Engineering, 2008, 5(3): 45-47.

 

Zaifeng Fan, Peter Smith, F. Rauch and Gerald Harris. Do OI Bone Intrinsic Material Properties Covary With Clinic Types? World Journal of Engineering, 2008, 5(3): 48-49.

 

Mariuca Gartner, P. Osiceanu, C. Vacaroiu, G. Popescu, M. Enache, M. Anastasescu, C. Trapalis, N. Todorova and M. Zaharescu. A Chemical Composition Study of Doped TiO2 Sol-Gel Films Linked to Antibacterial Properties. World Journal of Engineering, 2008, 5(3): 49-51.

 

Eun-Joo Jung, Chang-Zhe Shen and Il Kwang Kim. The Antioxidative Activities of Duchesnea Chrysantha (Zoll.Et Morr.) Fruitextracts and Protective Effects of LPS Induced Cytotoxicity Inlipopolysaccharide-Stimulated Murine Macrophage Cells. World Journal of Engineering, 2008, 5(3): 52-53.

 

Masanori Kikuchi, Yoshihisa Koyama, Kazuo Takakuda,Kazuya Edamura and Shigeo Tanaka. Development Novel Artificial Bone Using Hydorxyapatite/Collagen Self- Organized Bone-LikeNanocomposite Membrane. World Journal of Engineering, 2008, 5(3): 54-55.

 

Hiroshi Kimura. Powder Nanotechnology for Bioactive Ceramics. World Journal of Engineering, 2008, 5(3): 56-57.

 

Jungyoul Lim, Guofan Jin, Junggun Joung and Chaiho Lee. Synthesis and Characterization of Bis(1,3,5-Triazinyl) Carborane Derivatives as Potential Neutron Capture Therapy Agents. World Journal of Engineering, 2008, 5(3): 58-59.

 

 

X. Lou, Veronica Sub, Murray V Baker , J. Liu and Mon Thurs. Protein and Cell Adhesion on Phema-Co-Peo Hydrogel Polymers. World Journal of Engineering, 2008, 5(3): 60-61.

 

Koji Nakane, Takashi Ogihara, Nobuo Ogata and Shinji Yamaguchi. Enzymatic Synthesis of Esters Using Lipase Immobilized in Water-Soluble Polymeric Nanofibers. World Journal of Engineering, 2008, 5(3): 62-63.

 

Kunio Wakasa. Nano-analysis Model of Adhesive Strength in Dental Bonding Biomaterials. World Journal of Engineering, 2008, 5(3): 64-66.

 

Kee Do Woo, A.M. Omran, I. J. Son, M. S. Moon, D.S. Kang and Z.G. Liu. Study of the Porous Composite Fabrication with Titanium and Hydroxyapatite Powder. World Journal of Engineering, 2008, 5(3): 67-68.

 

X.M. Xu, G.Q. Guo, Y.P. Wang. Dental Composites Reinforced by Zirconia Nanofibers. World Journal of Engineering, 2008, 5(3): 69-70.

 

Jen Taut Yeh, Haw Jer Chang, Jing Wen Tang, Yuhui Zhou. Antibacterial and Miscible Properties of Chitosan/Collagen Blends. World Journal of Engineering, 2008, 5(3): 71-72.

 

Q.Q. Zhang, Q. Jiang, Y.S. Wang. Novel Fibrous Aggregates of Cholesterol -Saccharide Conjugate Which Act as a Template for Silica Transcription. World Journal of Engineering, 2008, 5(3): 73-74.

 

CHEMISTRY of COMPOSITES

 

L.Q. An, J. Zhang and S.W. Wang. Enhanced Upconversion Luminescence in Er3+ Doped Yttria Nanocrystalline Powders incorporated With Li + Ion. World Journal of Engineering, 2008, 5(3): 75-76.

 

Mohammed A. Binhussain, M. Mujtaba Khan. Crystallization of Nepheline-Pyroxene Glass-Ceramics. World Journal of Engineering, 2008, 5(3): 77-78.

 

Chenghsien Chung, Yajung Lee, Yuti Jhan. Analysis of the Resin infusion in the Sandwich Structure by the Vaccum Assisted Resin Transfer Molding. World Journal of Engineering, 2008, 5(3): 79-80.

 

Miha Drofenik, Irena Ban, Darko Makovec, Andrej Žnidaršič, Zvonko Jagličić, Darja Lisjak. The synthesis of Barium Hexaferrite Particles. World Journal of Engineering, 2008, 5(3): 81-82.

 

Aihua Du, Yupeng Liu, Baochen Huang and Wei Yao. Effect of Chlorine Trans-1,4-Polyisoprene on the Properties of CR/TPI Vulcanizates. World Journal of Engineering, 2008, 5(3): 83-84.

 

Prakash Dubey, V. Dubey and A. Singh. Luminescence Studies of Zinc Selenide Doped with Mn Phosphors. World Journal of Engineering, 2008, 5(3): 85-86.

 

H.K. Fu, C.F. Huang, S.W. Kuo and F.C. Chang. Synthesis and Characterization the Stimuli-Responsive ZnS/Pnipam Hollow Spheres. World Journal of Engineering, 2008, 5(3): 87-89.

 

K.C. Hsu and L.P. Chen. An Amphoteric Polymeric Dispersant for Barium Titanate Slurries. World Journal of Engineering, 2008, 5(3): 90-91.

 

W.B. Jiang, X.Y. Qiao and K. Sun. Investigation of the Structure and Molecular Interactions of Amorphous Acetylated Starch by Molecular Dynamics Simulation. World Journal of Engineering, 2008, 5(3): 92-93.

 

Peter J. Klar, T. Henning, M. Schreiber, W. Heimbrodt, J. Morell and M. Fröba. Solvent Adsorption by Periodic Mesoporous Organosilica in Dependence on Pore Size and Functionalization. World Journal of Engineering, 2008, 5(3): 94-95.

 

Jinsuk Lee, Kyungchell Kwak and Kyuyun Chai. Synthesis of Prunioside-a Ester Drivatives and Their Anti-Inflammatory Activities. World Journal of Engineering, 2008, 5(3): 96-97.

 

Mun Seong Lee, Jun Sik Oh, Yu Mi Jang and Kwang Woo Jung. Gas Phase Reactivity of Ti+ ion Within Ti+(ETHANOL)n Clusters. World Journal of Engineering, 2008, 5(3): 98-99.

 

Unsik Lim and Kyuyun Chai. Superparamagnetic Nanoparticles Conjugated With Gallic Acids. World Journal of Engineering, 2008, 5(3): 100-101.

 

Abdullah Mimaroglu, U. Sen, A. Ozel, I Kaya and S. Yılmaz. Friction and Wear of Poly-Ether-Imide Polymers. World Journal of Engineering, 2008, 5(3): 102-103.

 

Emma Mogilko, Yu. Kaganovskii, A. Lipovskii and V. Zhurikhina. Kinetics of Surface Clustering in Silver-Doped Glasses During Reactive Hydrogen Diffusion. World Journal of Engineering, 2008, 5(3): 104-105.

 

M. Oshikiri, M. Boero1, A. Matsushita and J. Ye. Detailed Adsorption Properties Of Water Molecule on the Surface of YvO4 Photo-Catalyst Investegated By First Principles Theoretical Approach. World Journal of Engineering, 2008, 5(3): 106-107.

 

Pradeepan Periyat, Declan E. McCormack, Steven J. Hinder and Suresh C. Pillai. Nitrogen doped TiO2 photocatalyst synthesized by Chemical Modification of precursor. World Journal of Engineering, 2008, 5(3): 108-109.

 

N. Suma, Y.S. Bhat, B.S. Jai Prakash and Pushpa Iyengar. Synthesis of Benzaldehyde Using Surfactant-Immobilized Interlayered and Metal Cation Impregnated- Manganate, Chromate Clays. World Journal of Engineering, 2008, 5(3): 110-111.

 

N. Suma, Y.S. Bhat, B.S. Jai Prakash, Pushpa Iyengar. Synthesis of Benzaldehyde Using Surfactant-Immobilized Interlayered and Metal Catin Impregnated-Manganate, Chromate Clays. 2008, 5(3): 112-113.

 

Rui Weng, Chonghui Wang, Lianmeng Zhang and Shuiping Wang. The Synthesis and Characterization of Novel Fluorine-Containing Organic Silane Surface Modifier. World Journal of Engineering, 2008, 5(3): 114-115.

 

S.Z. Wu, Y.G. Wang, J. Yi, James E. Mark, L.Q. Zhang and Mon-Wed. Effect of Structural Features and Temperature on Diffusion Selectivity of O2 vs. N2 in Ethylene-1-hexene Copolymer. World Journal of Engineering, 2008, 5(3): 116-117.

 

GENERAL APPLICATIONS and PROCESSING

 

M. Virginia Alonso, Amit Desai and Steven R. Nutt. Comparative Study of the Compressive Properties of Reinforced Epoxy and Phenolic Foams. World Journal of Engineering, 2008, 5(3): 118-119.

 

Jonathan Burns, R. Chen, V.R. Machavaram, M. Gower, G. Bryce and G.F. Fernando. A Novel Fibre Optic Sensor System For Simultaneous Detection Of Acoustic Emission, Strain & Temperature. World Journal of Engineering, 2008, 5(3): 120-121.

 

Chung Shin Chang. A Study of Cutting Temperatures in Turning of Glass Fiber Reinforced Plastics Materials. World Journal of Engineering, 2008, 5(3): 122-123.

 

R.R. Chang, T.C. Hsu and T.H. Chiang. Manufacturing of Composite Wind Turbine Blades by Vacuum Assisted Resin Transfer Molding. World Journal of Engineering, 2008, 5(3): 124-125.

 

X.J. Chen, Pradeep Bhattacharya, Ernest Walker and Jiecai Luo. An Explicit Formula for Determination of Simulation Runs for Analysis of VLSI Circuits. World Journal of Engineering, 2008, 5(3): 126-127.

 

J.T. Feng, B.B. Wang, F.C. Wang and Y.P. Zhao. Droplet Colliding and Bouncing Process on Super-hydrophobic PDMS Substrate. World Journal of Engineering, 2008, 5(3): 128-129.

 

Ioanna Giannopoulou and Dimitris Panias. Fire Resistant Geopolymers Synthesized from Industrial Wastes. World Journal of Engineering, 2008, 5(3): 130-131.

 

Seong Hwa Hur, Joong Jin Kim, Jin Hwe Kweon and Jin Ho Choi. Postbuckling Analysis of Filament Wound Composite Cylinders Under External Hydrostaic Pressure. World Journal of Engineering, 2008, 5(3): 132-133.

 

Hun-Hyeong Jeong, Seung-Reul Kim, Chaesil Kim and Heon-Oh Choi. Model Reduction Using Modes by Finite Element Analysis of a Large Marine Engine. World Journal of Engineering, 2008, 5(3): 134-135.

 

Q. Jiang. Mechanical Properties of Carbon Nanotubes With Nano-Fillings. World Journal of Engineering, 2008, 5(3): 136-137.

 

Wern Shiarng Jou and B.S. Chung. The Influences of Process Conditions Upon the Electromagnetic Shielding Effectiveness of a

Nano-Composite. World Journal of Engineering, 2008, 5(3): 138-139.

 

S. Ju, D.Z.Jiang, J.Y. Xiao and J.C. Zeng. Fabrication and Flexural Performance of Ultra-Lightweight Composite Trusses. World Journal of Engineering, 2008, 5(3): 140-141.

 

K. Kamal. ‘GMC’ columns that supersede contemporary concrete columns in the building structures. World Journal of Engineering, 2008, 5(3): 142-143.

 

Geon Hui Kim, Do Wan Lim, Jin Ho Choi and Jin Hwe Kweon. A Study of the Strength of Carbon-Carbon Brake Disk for Automotive Use. World Journal of Engineering, 2008, 5(3): 144-145.

 

F.M. Lai, J.H. Wu, Y.C. Tseng and J.S. Wang. Design of Clamping Apparatuses for Testing Composition of Composite Wind Turbine Blades. World Journal of Engineering, 2008, 5(3): 146-147.

 

Haiwen Li, K. Ikeda, T. Sato, M. Matsuo and S. Orimo. Development of Complex Hydrides for Various Energy Applications. World Journal of Engineering, 2008, 5(3): 148-149.

 

Huei Jeng Lin, C.I Liao and C.J. Tai. Blurred Problem of Gel-Coating Surface of SCRIMP-GFRP. World Journal of Engineering, 2008, 5(3): 150-151.

 

Ping Liu, Zeqing Wan and Weiming Zhou. Development of Studies on Mechanical Performance of Large-Deformation Concrete. World Journal of Engineering, 2008, 5(3): 152-153.

 

Z.F. Liu, C.Y. Peng, J.Y. Xiao and J.C. Zeng. A Rheological Model of an Epoxy Resin System Used In Processing Wind Turbine Blades. World Journal of Engineering, 2008, 5(3): 154-155.

 

H.W. Ma and W.W. Zhang. Corrosion Detection in Pipe based on Correlation Coefficients. World Journal of Engineering, 2008, 5(3): 156-157.

 

R.S. Mahendran, V.R. Machavaram, L. Wang, S.N. Kukureka, M. Paget and G.F. Fernamdo. A novel multi-measurand fibre0optic sensor. World Journal of Engineering, 2008, 5(3): 158-159.

 

Sana Malahat, Pio Iovenitti, Igor Sbarski, Matthew Solomon. Hot Embossing of Open Channel Polymer ESI-MS Chip Using Lasermachined and Electroformed Tools. World Journal of Engineering, 2008, 5(3): 160-161.

 

Shoaib A. Malik, Liwei Wang, Venkata R. Machavaram and Gerard F. Fernando. Self-Sensing Composies: Cure Monitoring and Damage Detection. World Journal of Engineering, 2008, 5(3): 162-164.

 

Philomena Chukwu and Marcela Muntean. Correlation: silica content and enamel frit properies. World Journal of Engineering, 2008, 5(3): 165-166.

 

K.M. Narayanappa, M. Krishna , H.N.N. Murthy and R.S. Kulkarni. Investigation of Physical Properties of Functionally Gadient Mterial using Centrifugal force. World Journal of Engineering, 2008, 5(3): 167-168.

 

Khanh Hung Nguyen and Jin-Hwe Kweon. A Study on Failure Load Prediction of Single Lap Bonded Joint of Carbon Composite and Aluminum. World Journal of Engineering, 2008, 5(3): 169-170.

 

J.Y. Oh, J.D. Hwang, S.Y. and JungY.G. Jung. Development of Post-Processor for 5-Axis Machiningwith Constant Feedrate. World Journal of Engineering, 2008, 5(3): 171-172.

 

Shingo Okamoto, Y. Fukuba, I. Harima, S. Gasami,T. Miyachi, T. Tochioka, M. Kaneko and Junichi Ogawa. Mechanical Material Properties of Long Glass Fiber Reinforced Plastic Foams Including Matrix Poly-Propylene. World Journal of Engineering, 2008, 5(3): 173-174.

 

R.B.Pandey and B.L.Farmer. Dispersion of platelets Via Coarse-grained computer Simulations. World Journal of Engineering, 2008, 5(3): 175-176.

 

Aaron James and Igor Sbarski. Creep behaviour of composites produced from waste paper and plastic. World Journal of Engineering, 2008, 5(3): 177-178.

 

Daniel Schwendemann. In-Line Compounding Of Long Fibre Reinforced Plastics and Injection or Compression Molding. World Journal of Engineering, 2008, 5(3): 179-180.

 

Sung Yong Shim, Dae Hwan Kim, Jin Qing Lin and Su Gun Lim. The Simple Method For Fabricating Of Extrusion Billet Of Aluminum Alloy And Its Otimization. World Journal of Engineering, 2008, 5(3): 181-182.

 

Kumar V. Singh and Greg J. Shendel. Towards the Nondestructive Evaluation of Structural Integrity Using Wireless Sensor Networks. World Journal of Engineering, 2008, 5(3): 183-186.

 

Stephan Sprenger, Anthony J. Kinloch, Ambrose C. Taylor and Reza D. Mohammed. Synergy Between Rubber-Toughening and Silica Nanoparticles in FRC. World Journal of Engineering, 2008, 5(3): 187-188.

 

Shen Jwu Su. Load Distribution Analysis of Composite Blade for Small Wind Turbine. World Journal of Engineering, 2008, 5(3): 189-190.

 

Bohua Sun. Uncooled Infrared Imaging Micro-Cantilever Pixel Bi-material Structure with Optical Readout. World Journal of Engineering, 2008, 5(3): 191-192.

 

Piyushkumar B. Tailor, J. Ramkumar, Kamal K. Kar. Rubber Composite: a Deformable Nano Finishing Tool for Viscoelastic Flow Finishing Process. World Journal of Engineering, 2008, 5(3): 193-194.

 

X.Y. Tang. Pure Bending Analysis of a Natural Fiber Composite Beam. World Journal of Engineering, 2008, 5(3): 195-196.

 

Gwo Chung Tsai. The Effect of a Bonded Composite Patch on the Stress Intensity Factor of Rib Stiffened Wing Skin. World Journal of Engineering, 2008, 5(3): 197-198.

 

Yu Chung Tseng, Shin Han Yang , Tai Yan Kam, Shen Jwu Su , Fengmin Lai and Jia Hroung Wu. Manufacturing and Mechanical Responses of Glass-Fiber/Epoxy Composite Laminates for Composite Wind Turbine Blades. World Journal of Engineering, 2008, 5(3): 199-200.

 

Norio Tsubokawa, Akira Yuki and Takeshi Yamauchi. Preparation and Properties of Composite Prepared from Flame Retardant-Immobilized Silica Nanoparticles. World Journal of Engineering, 2008, 5(3): 201-202.

 

G.Urushadze. Acoustic wave amplification in nanometer scale of superconducting josephson junctions. World Journal of Engineering, 2008, 5(3): 203-206.

 

Yu.V. Vorobiev, V.R. Vieira, P.P Horley, P.N. Gorley, and J. González-Hernández. Energy Spectra of an Electron confined in Triangular-and Hexagonal-Shaped Quantum dot. World Journal of Engineering, 2008, 5(3): 207-208.

 

Y.F. Wang, C.R. Zhang, J. Feng and Y.G. Jiang. Thermal Property of SiO2-aerogel Loading Short Mullite Fiber Rigid Insulation Tiles. World Journal of Engineering, 2008, 5(3): 209-210.

 

Gunnar Westin, Kjell Jansson and Asa Ekstrand. Solutions Based Processing of Hard Composites, Gradients and Coatings World Journal of Engineering, 2008, 5(3): 211-213.

 

Jia-Hroung Wu, Tai-Yan Kam, Feng-Min Lai and Yu-Chung Tseng. Failure Mode Analysis of Small Composite Wind Turbine Blades. World Journal of Engineering, 2008, 5(3): 214-215.

 

Wu Yufeil and Zhou Yingwu. Ductility design of compressin-yielding(cy) frp-reinforced concrete beams. World Journal of Engineering, 2008, 5(3): 216-217.

 

Shin-Han Yang, Hung Ou-Yang and Tai-Yan Kam. Free Vibration Analysis of a Sandwich-Type Composite Wind Turbine Blade. World Journal of Engineering, 2008, 5(3): 218-219.

 

Ismail Zainol, Ismarul Nizam Ismail and Sahrim Ahmad. Potential Application Of Liquid Natural Rubber as Toughening Agent In Epoxy Resin. World Journal of Engineering, 2008, 5(3): 220-221.

 

J.C. Zeng, C.P. Yin, J.Y. Xiao and J. Liu. Manufacturing and Properties of Polymer Composites With Soft Mold Assisted Resin Transfer Molding Process. World Journal of Engineering, 2008, 5(3): 222-223.

 

J.J. Zhang, Ghaus M. Rizvi, Chul B. Park, Q.P. Guo and H.X. Huang. ARheological Study to Determine Effectiveness of HDPE/Wood-fiber Composite Dispersion in a Twin-screw Extruder. World Journal of Engineering, 2008, 5(3): 224-225.

 

Y.P. Zhao and Q.Z. Yuan. Radius and Chirality-Dependent Flow in Carbon Nanotubes. World Journal of Engineering, 2008, 5(3): 226-227.

 

M. Zhu, X. Liu, M.Q. Zeng and Y. Ma. Effect of Microstructure Variation on Hardness In A Nanophase Composite StructuredAl-Sn Alloy Prepared by Mechanical Alloying. World Journal of Engineering, 2008, 5(3): 228-229.

 

Lei Zu, Sotiris Koussios and Adriaan Beukers. Design and Production of Toroidal Pressure Vessels Based on Non-Geodesic Roving Trajectories. World Journal of Engineering, 2008, 5(3): 230-231.

 

V.R. Machavaram, R.S. Mahendran, L. Wang, R. Chen, S.N. Kukureka and G.F. Fernando. Cure Monitoring and Water Ingress Detection Using A Low-Cost Fibre-Optic Sensor. World Journal of Engineering, 2008, 5(3): 232-233.

 

INFRASTRUCTURE COMPOSITES 

 

Con Y. Adam, H.R. Milner and B M Ahmed. Evaluation of Bulk Orthotropic Properties Of Heavy Plywood Bridge Decking. World Journal of Engineering, 2008, 5(3): 234-235.

 

Lin An andW.M. Huang. Constitutive Model for Concrete Under Multiaxial Loading Conditions. World Journal of Engineering, 2008, 5(3): 236-237.

 

Junseo Bae, Taesong Shin and Youngsang Cho. Application of Object ARX for Virtual 3d Rebar Drawing Modeling Focus On One-Way Slab. World Journal of Engineering, 2008, 5(3): 238-239.

 

Karel Blahous, Viktor Kulísek, Milan Ruzicka and Ondrej Uher. Integrated High Performance Joints in Composite Materials. World Journal of Engineering, 2008, 5(3): 240-241.

 

Lijuan Cheng, Ashley M. McComb and Mason E. Schmidt. Strengthening of Unreinforced Masonry Walls Using CFRP for Impact Resistance. World Journal of Engineering, 2008, 5(3): 242-243.

 

Sreekanta Das, Meiling Chen and Sun Yuan. Application of CFRP For Repair of Corroded Steel Beams. World Journal of Engineering, 2008, 5(3): 244-245.

 

Ahmed N.A. El Azim, Z.M. El Baradie and M.A. Moustafa. Effect of Remelting on the Structure and Properties of Modified Hypereutectic of Aluminum SiliconAlloys. World Journal of Engineering, 2008, 5(3): 246-247.

 

Mizi Fan. High Strength Natural Fibre Composites for Construction: Development Of Strong Natural Fibres. World Journal of Engineering, 2008, 5(3): 248-249.

 

Qingduo Hao and Jinping Ou. Investigation of Bond in Concrete Member With GFRP/Steel Wire Composite Rebars. World Journal of Engineering, 2008, 5(3): 250-251. 

 

Zheng He, Guang Song, Jianping Jin and David Hui. Numerical Simulation of Axially Compressive Mechanical Behavior of Preloaded Circular Concrete Columns With CFRP Confinement. World Journal of Engineering, 2008, 5(3): 252-253.

 

Seong Uk Hong, Yuri Kim and Youngsang Cho. Internal Diagnosis Applicatiom of Concrete Structures Using Ground Penetrating Radar Exploration. World Journal of Engineering, 2008, 5(3): 254-255.

 

Samuel I. Ibekwe, Zhenyu Ouyang, Michael A. Stubblefield and Guoqiang Li. Advanced FRP Grid Reinforced Concrete Beams and Slabs. World Journal of Engineering, 2008, 5(3): 256-257.

 

Chang Il Jang, Sangwoo Lee, Minjung Choi, Joonmo Kim and Jongpil Won. Aging and Microstructural Analysis of GFRP Dowel Bar After Alkaline Exposure. World Journal of Engineering, 2008, 5(3): 258-259.

.

Haengki Lee and Sungkug Ha. Failure Modes of RC Beams Strengthened With Sprayed Epoxy Coating. World Journal of Engineering, 2008, 5(3): 260-261.

 

Sangwoo Lee, Chang Il Jang, Minjung Choi, Joonmo Kim and Jongpil Won. Long-Term Performance of PET Fiber-Reinforced Cement Composites. World Journal of Engineering, 2008, 5(3): 262-263.

 

Guoqiang Li, Walid Alaywan , Samuel I. Ibekwe and Suseng Pang. Advanced FRP Grid Tube Encased Concrete Cylinders. World Journal of Engineering, 2008, 5(3): 264-265.

 

Xianxi Liu, Junruo Chen, Hongying Hou, Jinyan Shi and Hao Tan. One-Dimensional Two-Fluid Model for Pneeumatic Drying Wet Alumina Particles. World Journal of Engineering, 2008, 5(3): 266-267.

 

H.R. Milner and Con Y. Adam. Bondline Creep in Timber Members. World Journal of Engineering, 2008, 5(3): 268-269.

 

Doyoung Moon, Goangseup Zi, Dohyung Lee, Byeongmin Kim and Yoonkoog Hwang. Fatigue Behavior of the Foam-Filled Bridge Deck. World Journal of Engineering, 2008, 5(3): 270-271.

 

Liubov P. Myasnikova, Vyacheslav A.Marikhin, Elena M.Ivan’kova, Dmitrii V. Lebedev and A.L. Myasnikov. A Role of Surface Structure of Uhmwpe Reactor Powders in Producing Optimum Precursors for Drawing. World Journal of Engineering, 2008, 5(3): 272-273.

 

Shenghuoo Ni, Yanhong and HuangDaci Lin. Experimental Study of Underground Pipes Detection Using Ground Penetrating Radar. World Journal of Engineering, 2008, 5(3): 274-275.

 

Kiheung Park, Seong Uk Hong and Youngsang Cho. Study on Estimating Model the Thickness of Concrete Slab by Using Impact Echo Method and Neural Network. World Journal of Engineering, 2008, 5(3): 276-277.

 

Zihai Shi and Masaaki Nakano. Crack Analysis of Tunnel Linings Using Pseudoshell Model. World Journal of Engineering, 2008, 5(3): 278-279.

 

Mojtaba B. Sirjani and Zia Razzaq. Significance of Laterial Bending and Warping Strains in FRP I-Section Beams. World Journal of Engineering, 2008, 5(3): 280-281.

 

Daniel Stoica, Ramiro Sofronie and Stanislaw Majewski. Masonry Structures Retrofitting With Polymeric Grids. World Journal of Engineering, 2008, 5(3): 282-283.

 

Salah El-Din Taher, Ahmed Atta and Alaa El-Din Sharkawi. Composite Behavior for Moment Transfer in Connecting Precast Concrete Beam-Column Elements. World Journal of Engineering, 2008, 5(3): 284-285.

 

C.Y. Wang, Z.Y. Li, B.G. Han and J.P. Ou. A New Piezoresistive Cement-Based Composite With High Sensitivity To Stress/Strain. World Journal of Engineering, 2008, 5(3): 286-287.

 

X. Yan, H.Li and J.P. Ou. Freeze-Thaw Durability of Self-Sensing Concrete-Filled FRP/FRP-Steel Composite Tubes. World Journal of Engineering, 2008, 5(3): 288-289.

 

Weichung Yeih, J.J. Chang, C.C. Hong and J.R. Chang. Recarbonation of Concrete Rehabiliated by Electrochemical Alkalisation Method. World Journal of Engineering, 2008, 5(3): 290-291.

 

Junyu, Bingshe Xu and Xuguang Liu. Synthesis of Ni- Containing Carbon Nanocapsules from Deoiled Asphalt. World Journal of Engineering, 2008, 5(3): 292-293.

 

MAGNETIC COMPOSITES THIN FILMS 

 

M. Alaoui Lamrani(a), M. Addou(a), L. Dghoughi(a),N. Fellahi, J. C. Bernède, Z. Sofiani, B. Sahraoui, R. Dounia and M. Regragui. The effects of Al Doping on the Structural, Optical and Cathodoluminescence Properties of ZnO Thin Films Prepared by Spray Pyrolysis. World Journal of Engineering, 2008, 5(3): 294-295.

 

Gilles R. Bourret, Thomas Dominic Lazzara, Bruce Lennox and Theo G.M. van de Ven. Templated Synthesis of AGCN and Ag Nanowires. World Journal of Engineering, 2008, 5(3): 296-297.

 

D.P. Chen, X.L. Wang, C.T. Lin, S.X. Dou and Achille debattisti. Magnetic and Dielectric Properties in Mn-Doped CuO Single Crystal. World Journal of Engineering, 2008, 5(3): 298-299.

 

G.H. Chen, W.F. Sun and W.F. Zhao. Preparation and Characterization of Silver Coated Graphite Nanosheets. World Journal of Engineering, 2008, 5(3): 300-301.

 

Z.Y. Cheng, X.B. Shan, L. Zhang, P.X. Wu, C.R. Xu, J.L. Song and Bryan A.Chin. Ceramic-Polymer 0-3 Nanocomposites With High Dielectric Constant. World Journal of Engineering, 2008, 5(3): 302-303.

 

X.F. Dong, X.C. Guan and J.P. Ou. Optimal Orientation Field to Manufacture Unsaturated Polyester Resin-Bonded Terfenol-D Composites. World Journal of Engineering, 2008, 5(3): 304-305.

 

Y.P. Duan, H. Ma, L. Qi, S.H. Liu and Z.J. Ji. Crystall Structure Evolution and Microwave Electromagnetic Characteristics of Manganese Dioxide. World Journal of Engineering, 2008, 5(3): 306-307.

 

Frantisek Fendrych, P.Repa, L.Peksa, J.Poltierova Vejpravova, A.Lancok, R.Schaefer and K.Seemann. Nanostructured Magnetic FeCo-AlN Films for GHz Applications Deposited by UHV Hollow Cathode Plasma Jet. World Journal of Engineering, 2008, 5(3): 308-309.

 

Gao, G.J. Wang and W.T. Li. Control Release of Deta/No from Ethylcellulose Films. World Journal of Engineering, 2008, 5(3): 310-311.

 

Y.Z. Gou, L. Liu, X. Xing and X.D. Li. Preparation of Cf /SiC Composites via Modified PIP Route. World Journal of Engineering, 2008, 5(3): 312-313.

 

X.L. Han. An Arbitrary Dislocation in An Anisotropic Half-Space or Thin Film. World Journal of Engineering, 2008, 5(3): 314-315.

 

Tadeusz Hryniewicz and R. Rokicki. Improved Surface Properties of Nitinol After Magnetoelectropolishing. World Journal of Engineering, 2008, 5(3): 316-317.

 

S.Y. Huang, Naoki Fukata, Maki Shimizu, Takashi Sekiguchi and Tomohiro YamaguchiKoji Ishibashi. A Si Nanowire Single-Electron Device. World Journal of Engineering, 2008, 5(3): 318-319.

 

Yun ki Jang, Seung Ho Lee, Soo Young Kim, Gye Hyoung Yoo and Joong Hee Lee. The Synergetic Effects of Hybrid Conducting Fillers on the Properties of the Bipolar Plate of Direct Methanol Fuel Cell. World Journal of Engineering, 2008, 5(3): 320-321.

 

Rita John. Theoretical Investigation on  MgBC2 (B=Si,Ge,Sn; C=P,As). World Journal of Engineering, 2008, 5(3): 322-323.

 

S.Y. Jung, J.T. Hwang, J.Y. Oh, Y.G. Jung and O.C. Shin. The Decision of High-Efficiency Superfinishing Conditions Using Abrasive Film. World Journal of Engineering, 2008, 5(3): 324-325.

 

K.K. Kamani ,V. Ravindrachary, Ismayla,R F Bhajantri, A. Harish and S. Ganesh. Study of Chemical and Optical Properties of CompositeThin Films of PMMA and FeCl 3, by Electron Irradiation Effects. World Journal of Engineering, 2008, 5(3): 326-327.

 

Chung.Gil.Kang and J. Suresh Babu. Magnesium Based Hybrid Composites With Grphite Nanofiber and Alumina Fiber: Processing and Characterization. World Journal of Engineering, 2008, 5(3): 328-329.

 

Maria Kaniewska, O. Engstrom, M.Kaczmarczyk and G. Zaremba. Characterization Of Deep Levels And Quantum Confined Energy Levels In Inas/Gaas Quantum Dot Structures by Electrical Methods. World Journal of Engineering, 2008, 5(3): 330-331.

 

Vassilios C. Karavolas and Georgios P. Triberis. Thermal Conductivity and the Wiedemann-Franz Law in the Fractional Quantum Hall Effect in Nanostructures. World Journal of Engineering, 2008, 5(3): 332-333.

 

Karel Kral. Spontaneous Current and Voltage Generation in Gated Zero-Dimensional Nanostructures. World Journal of Engineering, 2008, 5(3): 334-335.

 

M. Alaoui Lamrani, M. Addou, L. Dghoughi,N. Fellahi, J. C. Bernède, Z. Sofiani, B. Sahraoui, R. Dounia and M. Regragui. The Effects of Al Doping on The Structural , Optical And Cathodoluminesce Properties of Zno Thin Films Prepared By Spray Pyrolysis. World Journal of Engineering, 2008, 5(3): 336-337.

 

Hohyeong Kim, Sunghoon Park and Chongmu Lee. Controlled Growth of Bi­2O3 Nanowires by Thermal Evaporation of Bi Powders. World Journal of Engineering, 2008, 5(3): 338-339.

 

Eun Jin Lee, Tae Hoon Lee and No Jin Park. Effect of Annealing Temperature on the Texture and Magnetic Properties of the Non-Oriented Electrical Steel. World Journal of Engineering, 2008, 5(3): 340-341.

 

H.P. Lei, X.Y. Jiang, J.Chen and Gerard Nouet. On the Stability of In-Rich Clusters in Ingan Quantum Wells. World Journal of Engineering, 2008, 5(3): 342-343.

 

Hongfei Lin, Changsheng Ding, Kazuhisa Sato, Yoshifumi Tsutai, Mabito Iguchi and Toshiyuki Hashida. Synthesis of Perovskite LSCF Powders by Citrate Gel-Combusion for SOFCS Applications. World Journal of Engineering, 2008, 5(3): 344-345.

 

Laszlo Nanai and Sandor Szatmari. Pecualirities of Oxide Micro and Nanostructures Grown in the Field of Laser Light. World Journal of Engineering, 2008, 5(3): 346-347.

 

Takeshi Okutani, Hiromichi Ono, Hideaki Nagai and Mikito Mamiya. Synthesis of Magnetostrictive SmFe2 With Ordered Structure In Microgravity. World Journal of Engineering, 2008, 5(3): 348-349.

 

No Jin Park, Sang Hoon Lee and Jung Il Lee. Effect of Film Thickness on the Annealing Texture in Sputtered Cu Films. World Journal of Engineering, 2008, 5(3): 350-351.

 

Okkyung Park, Namhoon Kim, Hoyoun Kang, T. Jeevananda2 and Joonghee Lee. Effect of The Surface Modification On The Electrical Conductivity of Cnt/Pani Composition. World Journal of Engineering, 2008, 5(3): 352-353. 

 

L. Qiao, X.H. Han, F.S. Wen, Y. Yang, J.B. Wang and F.S. Li. Dipolar Interaction Of Ni Nanowires Studied by Microwave Permeability Spectra. World Journal of Engineering, 2008, 5(3): 354-355.

 

Fernando Ramirez, Balaji Mahalingman, Paul R. Heliger and Anthony K. Rappe. AIP-Quantum Dots Vibrational Spectra. World Journal of Engineering, 2008, 5(3): 356-357.

 

Akiyoshi Shimada, Nahoko Kasai and Keiichi Torimitsu. Conductive-Polymer Microelctrode Array for Neural Signal Measurements. World Journal of Engineering, 2008, 5(3): 358-359.

 

F.J. Sun, T. Sun and L.J. Li. Relationship between Infrared Absorption Spectral Shift and Grain Size/Lattice Constant for Nanometer Magnesia. World Journal of Engineering, 2008, 5(3): 360-361.

 

Georgios P. Triberis and M. Dimakogianni (U. Athens, Greece). DNA: a Molecular Conductive Nanowire. World Journal of Engineering, 2008, 5(3): 362-363.

 

H.X. Wang, W.Q. Huang, F. Jin and C.L. Feng. PL Emission in Low-Dimensional Structure of Si 1-x Gex Formed by Electrochemical Etching and Annealing. World Journal of Engineering, 2008, 5(3): 364-365.

 

S.L. Wang, J.C. Kong, L.D. Kong, J. Zhao, X.J. Li and R.B. Ji. Studies of RF Magnetron Ssputterted Amorphous HgCdTe Films. World Journal of Engineering, 2008, 5(3): 366-367.

 

Kushvaha, X. Chu, H. Zhang, Z. Yan and W. Xiao. Selective Self-Assembly of Straight and Branched Sb Nanorods and Bi Nanobelts on Inert Substrates Xue Sen Wang, S.S. World Journal of Engineering, 2008, 5(3): 368-369.

 

F.S. Wen, H.B. Yi and F.S. Li. Microwave Absorption Properties at High Concentration of Fe-Filled Multi-Walled Carbon Nanotubes. World Journal of Engineering, 2008, 5(3): 370-371.

 

Meng Kao Yeh, Nyan Hwa Tai, Guo Chian Ling and Chi Yuan Huang. Electromagnetic Shielding Effectiveness of Double-Layer Mwnt/Epoxy Nanocomposites. World Journal of Engineering, 2008, 5(3): 372-373.

 

Jong Hwan Yoon. Synthesis of Nickel /Silicon Compositional Nanocrystals in Silicon Dioxide Films. World Journal of Engineering, 2008, 5(3): 374-375.

 

Akira Yoshida, Akihiro Wakahara and Hee Joon Kim. Electronic Structure of Zn O1-X SX. World Journal of Engineering, 2008, 5(3): 376-377.

 

J.J. Zhou and N.J. Zhou. Development of a Micro XY Stage Using Amplified Magnetostrictive Actuators World Journal of Engineering, 2008, 5(3): 378-379..

 

L.C. Zhou, G.H. Chen, J.S. Lin and H.F. Lin. Electrical Breakdown in High-Density Polyethylene/Graphite Nanosheets Conducting Composites. World Journal of Engineering, 2008, 5(3): 380-381.

 

Y. Zhou, H.B. Feng, D.C. Jia and Q.C. Meng. Microstructural Development of In Situ Synthesized TiB/Ti(Fe,Mo) Composites Fabricated by Spark Plasma Sintering. World Journal of Engineering, 2008, 5(3): 382-383.

 

MATHEMATICAL MODELING

 

A.M. Afsar, R. Rahman, Y.Q. Wang, Y. Shi and J.I. Song. Finite Difference Solution of Stress and Strain in an FGM Plate. World Journal of Engineering, 2008, 5(3): 384-385.

 

B.H. Ajay, S.U. Anup, N. Bharath, J.M. Jayanth and S.M. Kulkarni. Electro-Mechanical Modeling of Multi-Layered PVDF Composite. World Journal of Engineering, 2008, 5(3): 386-387.

 

A.R. Akande and A. Nechibvute. Energy Harvesting From a Vibrating Cantilever Beam. World Journal of Engineering, 2008, 5(3): 388-389.

 

Francesco Ascione and Luciano Feo. The Effects of Fibre Inclination Angle and Stacking Sequence on the Bearing Load Failure of GFRP Laminates. World Journal of Engineering, 2008, 5(3): 390-392.

 

Abraham I. Beltzer. Probabilistic Properties of Effective Moduli Within the Hashin-Shtrikman Bounds. World Journal of Engineering, 2008, 5(3): 393-394.

 

Harald Berger, Sreedhar Kari, Ulrich Gabbert and Reinaldo Rodriguez-Ramos. A General Micro-Mechanical Numerical Approach for Calculating Effective Properties of Composites With Randomly Distributed Inclusions of Different Shapes. World Journal of Engineering, 2008, 5(3): 395-396.

 

Eugene B. Caldona. Statistical Modeling of the Waste Utilization Value by Multiple Regression and Historical Response Surface Methods. World Journal of Engineering, 2008, 5(3): 397-398.

 

G. Caprino, V. Lopresto, I. De Iorio and C. Leone. Destructive Impact Damage Analysis of GFRP Laminates. World Journal of Engineering, 2008, 5(3): 399-400.

 

His Hung Chang, Ciann Dong Yang and Chen Pin Lee. Revisit of Ballistic Quantum Motion In Straight Channel: Quantum Hamilton Mechanics. World Journal of Engineering, 2008, 5(3): 401-402.

 

B. Chen, H. Wan, J.Y. Mu and S.X. Bai. Ablative Mechanism of Carbon-Fiber/Epoxy Composites Irradiated by Re-Frequency Laser. World Journal of Engineering, 2008, 5(3): 403-404.

 

C.F. Chen and Iwei Li. Analytical Linear Study of Large Deflection of Un-symmetrically Layered Piezo-Electric Plate under Initial Tension. World Journal of Engineering, 2008, 5(3): 405-407.

 

Chongdu Cho, S. Lu and G.P. Zhao. Experimental Analysis of Composite Laminates Under Impact Loading. World Journal of Engineering, 2008, 5(3): 408-409.

 

Jae Ung Cho, A.J. Kinloch, B.R.K. Blackman, F.S. Rodriguez Sanchez, C. Cho and G. Zhao. Damage Characteristics of Adhesively-bonded Composite Materials under Impact Loading. World Journal of Engineering, 2008, 5(3): 410-411.

 

Siu Tong Choi, Rong Che Hsieh and YuTuan Chou. Three-Dimensional Vibration Analysis of Anisotropic Rectangular Plates By Differential Quadrature Method.  World Journal of Engineering, 2008, 5(3): 412-413.

 

Cheng Hsien Chung, Ya Jung Lee, Chin Cheng Lin and Yu Ti Jhan. Progressive Failure Analysis of Marine FRP Stiffened Plates Subjected to Static Water Pressure. World Journal of Engineering, 2008, 5(3): 414-415.

 

Y.M. Fu, Y.Q. Mao and Y.P. Tian. Active Control of Piezoelastic Laminated Shallow Spherical Shells with Damage. World Journal of Engineering, 2008, 5(3): 416-417.

 

F. Gao, J.R. Chen, J.R. Zhang and Y.P. Zeng. A Numerical Algorithm for Solving Non-linear transient temperature Field Based on Weak from. World Journal of Engineering, 2008, 5(3): 418-419.

 

N.Q. Guo, S. Saravanan, B.S. Wong and Y.Z. Yong. Guided Wave Divergence in Composite Laminates. World Journal of Engineering, 2008, 5(3): 420-421.

 

K.M. Gupta. Analysis of a Variable Thickness Composite Circular Plate. World Journal of Engineering, 2008, 5(3): 422-424.

 

G.M. Hu, H.Wan, L. Lie and Y. Li. From a Micro Structure Model to the Macro Mechanical Properties for Two-Dimensional Cellular Solids. World Journal of Engineering, 2008, 5(3): 425-426.

 

Hsuan-Teh Hu and Wen-Kuei Tsai. Maximization of the Fundamental Frequencies of Axially Compressed Laminated Plates Against Fiber Orientation. World Journal of Engineering, 2008, 5(3): 427-428.

 

H. Huang, L.Y. Zhang, Abid Hussain and Xianzhu Liang. Improving Inter-Laminar Shear Strength Of Composite Laminates With Metallic Pins. World Journal of Engineering, 2008, 5(3): 429-430.

 

Hui HuangJiyu Zhou, Jinquan Xu and Zhongcheng Guo. Infrared Spectroscopic Study of The Solid-State Protonation of Polyaaniline. World Journal of Engineering, 2008, 5(3): 431-433.

 

Tingjung Chen and Jongshin Huang. Relationship Between Creep Strain Rate and Creep-Buckling Time of Open-Cell Foams. World Journal of Engineering, 2008, 5(3): 434-435.

 

MingHwa R. Jen, Yi Chun Sung and Chunwu Liou. Tensile and Fatigue Behavior of Ti/APC-2 Hybrid Composite Laminates at Elevated Temperatures. World Journal of Engineering, 2008, 5(3): 436-437.

W.G. Jiang. Prediction of Composite Properties from Micromechanical Finite Element Model Using Domain Superposition Technique. World Journal of Engineering, 2008, 5(3): 438-439.

 

Martin M Jin, M.O.W. Richardson and Zhongyi Zhang. Indentation and Penetration of Hybrid Fibre Reinforced Plastic Laminates. World Journal of Engineering, 2008, 5(3): 440-442.

 

Fethi Kadioglu and Bahar Ayhan. Mixed Finite Element Solution for In-Plane Free Vibration Analysis of Circular Composite Beams. World Journal of Engineering, 2008, 5(3): 443-444.

 

Kamila Kotrasova and Eva Kormaníkova. Seismic Design of Liquid Storage Tank Made From Composite Material.

World Journal of Engineering, 2008, 5(3): 445-446.

 

Jerzy Kapelewski. On a Potential of Ferroic Composites in SAR Antenna Systems Applications. World Journal of Engineering, 2008, 5(3): 447-448.

 

Eva Kormaníkova. Optimal Design of Thickness of Sandwich Plate. World Journal of Engineering, 2008, 5(3): 449-450.

 

Dong Hyeok Lee, Jea Bong Na, Chaesil Kim and Heon Oh Choi. Nonlinear Impact Simulation for a Submerged Structure. World Journal of Engineering, 2008, 5(3): 451-452.

 

V. Lopresto, C. Leone, G. Caprino and I. de Iorio. Analysis of Acoustic Emission Signals Produced by Different Carbon Fibre Reinforced Plastic Laminates. World Journal of Engineering, 2008, 5(3): 453-454.

 

Karim S. Numayr and Yousef S. Al Rjoub. Forced Vibration of Sandwich Beams. World Journal of Engineering, 2008, 5(3): 455-456.

 

Jae Hyun Park, Chang Su Ban, Jin Ho Choi and Jin Hwe Kweon. The Failure Load Prediction of Adhesive Joints Using the Modified Damage Zone Theory. World Journal of Engineering, 2008, 5(3): 457-458.

 

Jungsun Park, Jong-Bin Im and Jai-Hyuk Hwang. Optimization Problems by the Partcle Swarm Algorihtm. World Journal of Engineering, 2008, 5(3): 459-460.

 

Sarka Peskova and Petr P. Procházka. Penalty Formulation of Debonding Process in Composites. World Journal of Engineering, 2008, 5(3): 461-462.

 

G. Ramirez and A. Gupta. Contact Problems In Magneto-Electro-Elastic Layered Half-Planes Using Local/Global Approach. World Journal of Engineering, 2008, 5(3): 463-464.

 

Myeong Su Seong, Min Gyu Song, Jin Hwe Kweon and Jin Ho Choi. An Experimental Study on the Strength of Single Lap Bonded Joints of Carbon Composite and Aluminum. World Journal of Engineering, 2008, 5(3): 465-466.

 

Yu Shi, In Taek Lee, Yi Qi Wang, Md. Afsar Ali and Jung Il Song. Low Velocity Impact Behavior of Aluminum Honeycomb Structures. World Journal of Engineering, 2008, 5(3): 467-469.

 

Sushmit Shreyans, Riddhideep Mandal, Nisith Ranjan Mandal and Pankaj Biswas. Design and Development Of Composite Culverts Using Finite Element Analysis. World Journal of Engineering, 2008, 5(3): 470-471.

 

Bin Park , Jin Hwe Kweon* and Jin Ho Choi. An Experimental Study on the Insert Joint Strength of Sandwich Structures Under Pull-Out Loading  Keun Keun-Il Song, Yong World Journal of Engineering, 2008, 5(3): 472-473.

 

Shamsuddin Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F. Abdewi. Effects of Shape and Geometry on the Energy Absorption of Fiberglass Composite Tubes. World Journal of Engineering, 2008, 5(3): 474-475.

 

J.M. Tao, X.K. Zhu and M.C. Xu. Effect of Severe Plastic Deformation On Mechanical Properties And Electrical Conductivity of Bulk Copper. World Journal of Engineering, 2008, 5(3): 476-477. 

 

Jiannquo Tarn and Hsihung Chang. Exact Analysis of Extension, Torsion, and Bending of Composite Laminates and FGM. World Journal of Engineering, 2008, 5(3): 478-479.

 

J. Tarrio Saavedra, J. López Beceiro, S. Naya and R. Artiaga. Viscoelastic Characterization of Fumed Silica/Epoxy Composites. World Journal of Engineering, 2008, 5(3): 480-482.

 

Zongruo Tian, Z. Sun and Z.Y. Li. Theoretical Solution and Experimental Method of Torsion Problem of Composites. World Journal of Engineering, 2008, 5(3): 483-484.

 

Radomir Turk and Matevz Fazarinc. Newly Developed Test for Assesment of Thermal Fatigue Resistance. World Journal of Engineering, 2008, 5(3): 485-486.

 

H.N. Vidyasagar and S.Gopal Prakash. Finite Element Analysis of the Effect of the TBC on Heat Transfer Characteristics. World Journal of Engineering, 2008, 5(3): 487-488.

 

Yi Qi Wang, Hee Don Kwon, Soo Tae Kim, Ali Md. Afsar and Jung Il Song. Taguchi Method to Optimize Brazing Conditions for Copper and ASTM A501 Steel. World Journal of Engineering, 2008, 5(3): 489-490.

 

Y.Q. Yang and M.N. Yuan. Experimental and Numerical Analysis on Interfacial Bonding of Fiber Reinforced Composites. World Journal of Engineering, 2008, 5(3): 491-492.

 

J. Yu, Z.B. Cai, J.L. Mo and M.H. Zhu. Study on Tribological Behaviors Under Reciprocating Sliding of Two Casting Nylon Composites. World Journal of Engineering, 2008, 5(3): 493-494.

 

F.F. Zheng, Jinho Choi and Jin Hwe Kweon. A Study On Ultrasonic Pulse-Echo Characteristic Of Composite Material. World Journal of Engineering, 2008, 5(3):495-496.

 

S.Y. Kuo. An Analytical Solution for Stiffening Effects on the Natural Frequencies of Laminated Beam Plates with Piezoelectric Actuators. World Journal of Engineering, 2008, 5(3): 497-498.

 

METAL MATRIX COMPOSITES

 

C.N. Chandrappa, K.V. Sharma, M.K. and Muralidhara. Studies on Wear Properties of 7075 (Al-Zn-Mg) Alloy Subjected to Retrogression and Reaging Heat Treatment. World Journal of Engineering, 2008, 5(3): 499-500.

 

Leszek A. Dobrzanski, J. Domagała, T. Tański, A. Klimpel and D. Janicki. Laser Surface Treatment of Magnesium Alloy With Side Injection Of Titanium Carbide. World Journal of Engineering, 2008, 5(3): 501-502.

 

J.A. Garcia Hinojosa, E. Trejo E., M.A. Ramírez A. and M.K. Surappa. Thermal Analysis of A356/10 Vol. % SiCp Cast Composites With Ti-B Grain Refinement and Sr Modification Treatments. World Journal of Engineering, 2008, 5(3): 503-504.

 

D.P. Girish, N. Govindaraju, K. Srinivasan, T. Seetharam, P. Sampath Kumaran and R. Suresh. Influence of Boride on the Erosion Behaviour of Mild Steel Alloy. World Journal of Engineering, 2008, 5(3): 505-508.

 

No.4

 

Andrei. A. Gusev and Olga Guseva. Influence of Filler Shape and Volume Loadings on Performance of Mixed Matrix Membranes for Gas Separations: a Direct Finite Element Study. World Journal of Engineering, 2008, 5(4): 509-510.

 

Olga Guseva, Thomas Suter, Patrik Schmutz and Oliver von Trzebiatowski. Modelling of Anodic Dissolution of Pure Aluminium in Chloride Media. World Journal of Engineering, 2008, 5(4): 511-512.

 

Kotaro Hanada and Koichiro Hattori. Graphite Nanofibers- Reinforced Magnesium Nanocomposite Fabricated by Pressure Infiltration. World Journal of Engineering, 2008, 5(4): 513-514.

 

S.N.Harish and Shivarudraiah. Experimental Study on Condition Monitoring of Roller Bearing. World Journal of Engineering, 2008, 5(4): 515-516.

 

H. He, Y.M. Li, X.Q. Liu and F.H. Luo. Al/SiC Composites Prepared by PIM Perform with High Reinforcement Content. World Journal of Engineering, 2008, 5(4): 517-518.

 

Chih Feng Hsu, Fan Shiong Chen, Hong Ming Lin and Pee Yew Lee. Preparation and Mechanical Properties of Mechanically Alloyed Carbon/Ti50Cu28Ni15Sn7 Bulk Metallic Glass Composites. World Journal of Engineering, 2008, 5(4): 519-520.

 

W. M.Huang, H.Fan and J. P.Liu. Influence of Ni Micro Powder Chains on the electrical Resistivity of Paraffin Wax Filled With Carbon Black. World Journal of Engineering, 2008, 5(4): 521-522.

 

Sun Keun Hwang, Y.B. Chun, S.H. Yu and D.H. Shin. Microstructural Evolution of Severely Deformed Ti. World Journal of Engineering, 2008, 5(4): 523-524.

 

Chien Ping Ju, T.C. Su and Jiin Huey Chern Lin. Tensile Properties of Thermomechanically Treated Ti-15Mo-1Bi Alloy. World Journal of Engineering, 2008, 5(4): 525-526.

 

Yong Ho Kang, Ali Mohammad Afsar and Jung Il Song. Evaluation of Stress Corrosion Cracking Resistance of 12Cr Alloy Steel for Steam Turbine Blades. World Journal of Engineering, 2008, 5(4): 527-528.

 

Ryo Kubota, Akira Shimamoto, Daiju Numata, Masayuki Anyouji and Kazuyoshi Takayama. Perforation Characteristic of CFRP with different laminating by Hypervelocity Impact. World Journal of Engineering, 2008, 5(4): 529-530.

 

Hyejung Lee, Tae Hoon Lee, No Jin Park, Je Hyun Lee and Myung Hoon Oh. Orientation Mesurement and Related Mechanical Properties of  Directionally Solidified NiAl/Ni3Al Two-Phase Alloys. World Journal of Engineering, 2008, 5(4): 531-532.  

 

HyunJun Lee, Jun Jiang, SunChul Huh and WonJo Park. A Study on Compressive Strength Characterisitics of Aluminum Borate Whisker Preform. World Journal of Engineering, 2008, 5(4): 533-534.

 

Y.M. Li, H. He, J. Lou and J.G. Zhang. Co-sintering of Fe2Ni/Fe2NixCr Bi-layer Composites. World Journal of Engineering, 2008, 5(4): 535-536.

 

Yin Chih Lin, Hwa Teng Lee and Chien Feng Lin. Recrystallization of Ferromagnetic Fe-Pd-Rh Alloys. World Journal of Engineering, 2008, 5(4): 537-538.

 

J.W. Liu, T.M. Yue and Z.N. Guo. Electrochemical Discharge Machining of Particle Reinforced Aluminum Alloy 6061 with Concavo-Convex Electrode. World Journal of Engineering, 2008, 5(4): 539-540.

 

Kloc-Ptaszna, L.A. Dobrzański and G. Matula. Properties of Sintered Gradient Tool Wc/Hs6-5-2 Materials. World Journal of Engineering, 2008, 5(4): 541-542.

 

K.V. Sharma and C. Yuvaraja C. Study on Transition Behaviour of Al/Al2O3 MMCs. World Journal of Engineering, 2008, 5(4): 543-544.

 

Shivarudraiah and R. Suresh. Grain Refinement and Mechanical Properties of Al7075 Alloy by Equal Channel Angular Extrusion. World Journal of Engineering, 2008, 5(4): 545-546.

 

Y.L. Tan, C.J. Sun and T.B. Zhao. Numerical experiments for failure Pattern of Micro-inhomo Geneous Material Containing Parallel Fibers. World Journal of Engineering, 2008, 5(4): 547-548.

 

Wei Hsin Tien, Shuang Shii Lian, Kun Chao Tsai, Wei Ja Shong and R.Y. Lee. The Development of Porous Materials with Compositie Bi-Metal Powders. World Journal of Engineering, 2008, 5(4): 549-550.

 

J.L. Wang, R.D. Xu and Z.C. Guo. Structure and Properties of Amorphous Ni-Cu-P Alloy Layer Prepared by Electroless Plating. World Journal of Engineering, 2008, 5(4): 551-552.

 

Q.Q. Wang, S.R. Qiao, Y. Xia, G.F. Lu and C.Y. Zhang. The Phase Transformation of C/SiCN During Creep. World Journal of Engineering, 2008, 5(4): 553-554.

 

Jiuba Wen, Jingling Ma and Guangfu Li. The Influence of Heat Treatment on Performance of Aluminum Alloy Sacrificial Anodes. World Journal of Engineering, 2008, 5(4): 555-556.

 

Hitomi Yamaguchi and Kotaro Hanada. Development of Fine Iron-Based Composite Abrasives With Surface-Borne Alumina Grains for Magnetic Abrasive Finishing. World Journal of Engineering, 2008, 5(4): 557-558.

 

Bo Cheng Yang and Yin-Chih Lin. Phase Microstructure in Ferromagnetic Fe-Pd-Mn Alloys. World Journal of Engineering, 2008, 5(4): 559-560.

 

T.M. Yue, K.J. Huang and H.O. Yang. Laser Cladding of Cu-Based Amorphous Composite Coating on Magnesium Alloy AZ World Journal of Engineering, 2008, 5(4): 561-562.

 

Dongju Zhao, Leiv Kolbeinsen and Raymond Longbottom. Production of Grain Refining Alloys of Containing Ceriu. World Journal of Engineering, 2008, 5(4): 563-564.

 

Y.Q. Zhao, R.N. Wang and Z.P. Xi. Characterization of Hot Deformation Behaviour of TiC Particles Reinforced Titanium Matrix Composites. World Journal of Engineering, 2008, 5(4):565-566.

 

Nanjia Zhou, Andrey Beyle and Christopher C. Ibeh         . Temperature-frequency analogy for vinyl ester reinfouced by 3D fabrics. World Journal of Engineering, 2008, 5(4): 567-568.

 

Yong Bum Choi, Kazuhiro Matsugi, Gen Sasaki, Sung Ho Park and Won Jo Park. Ivestigation on Infiltration of Molten Aluminum into a Metal Fibrous Preform. World Journal of Engineering, 2008, 5(4): 569-570.

 

NANO COMPOSITES

 

Adnan Ahmed, Krishnakumar Shankar and Andrew Neely. Manufacturing of Nano-scale Particulate Ppeinforced Aluminum Matrix Composites. World Journal of Engineering, 2008, 5(4): 571-572.

 

Fahad S. Al Kasmoul, Muataz A. Atieh, Naif M. Al Abbadi , Sulaiman I. Al Mayman and Bader.A Al Shehri. Production of Carbon Nanofibers by Using Catalytic Cracking Chemical Vapor Deposition Method (CC-CVD). World Journal of Engineering, 2008, 5(4): 573-576.

 

Jadwiga Bak-Misiuk, P. Romanowski, J. Domagala, A. Misiuk,E. Dynowska, A. Barcz, J. Sadowski and W. Caliebe. Mn – Containing Nanoclusters in Magnetically Ordered Si:Mn and GaMnAs. World Journal of Engineering, 2008, 5(4): 577-578.

 

U.Beck, R.Lange, U.Lembke and H.G.Neumann. Multilayer Coating For Stents With Tinbn, SiO2 Xerogel And Nanostructured Cap. World Journal of Engineering, 2008, 5(4): 579-580.

 

Bessem BenDoudou, Jun Chen, Alexandre Vivet, Christophe Poilane, Gerard Nouet and Mhamed Ayachi. Ab Initio Study of Interactions Between Covalently Functionalized Carbon Nanotubes. World Journal of Engineering, 2008, 5(4): 581-582.

 

Xim Bokhimi, Antonio Morales and Oscar Ovalle. Quantitative Analysis of Nanocrystalline Materials Using X-Ray Powder Diffraction. World Journal of Engineering, 2008, 5(4): 583-584.

 

Francisco C. Robles Hernández and Hector A. Calderon. Nanostructured Al-Al4 C3 Composites Using CGraphite or CFullerene as initial reinforcements. World Journal of Engineering, 2008, 5(4): 585-587.

 

Feng Chih Chang. Nanocomposites based on Polyhedral Oligomeri Silsesquioxane (POSS). World Journal of Engineering, 2008, 5(4): 588-590.

 

Vinay kr. Chaudhary and P.A. Mahanwar. Waste HIPS-PE Foam (Partially Crosslinked) Composites. World Journal of Engineering, 2008, 5(4): 591-592.

 

B. Chen, S.T. Sun, X.H. Peng, David Hui and G.Z. Quan. Interlaced Nano-Chitin-Fibers In Lucanidae Cuticle. World Journal of Engineering, 2008, 5(4): 593-594.

 

H. Chen and Chuh Yung Chen. Modification of Carbon Nanotubes by Plasma Treatment and Preparation of CNT-Epoxy Composite. World Journal of Engineering, 2008, 5(4): 595-596.

 

Wen Hwa Chen, Hsien Chie Cheng, Yu Chen Hsu, Ruoh Huey Uang and Jon Hiung Hsu. Mechanical Properties of Transversely Isotrpic Co-Nanowire-Reinforced Polymer Composites. World Journal of Engineering, 2008, 5(4): 597-598.

 

G.X. Cheng, C.L. Du, J.H. Duan, J. Wang, S.T. Zhang, Y.F. Chen, H. Xia, K.J. Chen, X.K. Zhang, W. Zhang, Y.L. He, F.Q. Liu, G.H. Wang, H. Shan, Y.W.Du, Y.B. Xu and J.A.C.B.land. Nanostructures and Raman Scattering. World Journal of Engineering, 2008, 5(4): 599-600.

 

H.F.Cheng, Q.F. Liu and X.H. Fan. Research on the Mechanical Properties and Microstructure of PP/Kaolin Nanocomposites. World Journal of Engineering, 2008, 5(3): 601-602.

 

Anil ChinnabhandAr, Jeena Jose, H N Narasimha Murthy and M Krishna. Effect of Solvents on the Mwcnt / Adhesive Grade Epoxy Nanocomposites Preparation. World Journal of Engineering, 2008, 5(4): 603-604.

 

Wanjung Chou and Chuhyung Chen. Effect of Carbon Nanotube With Plasma Modified in the Polyimide Matrix. World Journal of Engineering, 2008, 5(4): 605-606.

 

Gennaro Conte, M.C. Rossi and S. Salvatori. Capacitive Effects in Ultrananocrystalline Diamond. World Journal of Engineering, 2008, 5(4): 607-608.

 

Daniel Davis, Jiang Zhu and Justin Wilkerson. Failure Mechanisms of a Nanocomposite Laminate in Fatigue. World Journal of Engineering, 2008, 5(4): 609-610.

 

Bruno Debenedetti, D. Vallauri, F.A. Deorsola, G. Ortigoza and I. Amato. Ultra High Temperature (UHT) Nanocomposites Through Fast Synthesis and Densification Processes. World Journal of Engineering, 2008, 5(4): 611-612.

 

Yoram de Hazan, Dennis Werner, Torben Reuter, Markus Z’graggen, Sigfried Roos and Thomas Graule. Ni-P/Ceramic Nano-composite Coatings Deposited from Stable Dispersions in Electroless Nickel Solutio. World Journal of Engineering, 2008, 5(4): 613-614.

 

Jinglan Deng, Ch. V. Subba Reddy, Edwin H. Walker, Jr. Dielectric Behavior of (PZT/PVDF) Nanocomposites for Temperature Sensors. World Journal of Engineering, 2008, 5(4): 615-616.

 

Emilie Dubuisson, Cécile Philippot, Fabien Dubois, Patrice L. Baldeck, Robert Pansu and Alain Ibanez. Confined Nucleation and Growth of Organic Nanocrystals in Sol-Gel Matrices For Biophotonics. World Journal of Engineering, 2008, 5(4): 617-619.

 

Constantin Gheorghies, David Hui, G. Carac and I. V. Stasi. Doping Effect on Texture Degree of a Composite Layer. World Journal of Engineering, 2008, 5(4): 620-621.

 

N.N. Ghosh, Prita P. Sarangi and B.D. Naik. Preparation of High Performance Polybenzoxazine- Ferrite Nanocomposites and their Properties. World Journal of Engineering, 2008, 5(4): 622-623.

 

M. Ghouse, M.F. Al-Otaibi, A. Al-Musa and G. Al-Mutairi. Preparation and characterization of La0.7Ca0.3CrO3 Nano Ceramic Powders by Sol-gel Process for Solid Oxide fuel Cell (Sofc) Application. World Journal of Engineering, 2008, 5(4): 624-625.

 

J.H. Gou, Z.F. Zhao, G.B. Song and David Firsich. Multifunctional Composite Materials And Structures Based on Carbon Nanofiber Paper. World Journal of Engineering, 2008, 5(4): 626-628.

 

G.B. Gu, Z.W. Zhou, S.C. Hu, Y. Gou, X. Jian and H. Chen. Preparation and Electromagnetic Properties of Several Types of Nanostructured PANI. World Journal of Engineering, 2008, 5(4): 629-630.

 

Jiecai Han, Changqing Hong and Xinghong Zhang. Microstructure and Mechaincal Properties of TiB2 Matrix Compoistes Reinforced by Carbon Nanotubes. World Journal of Engineering, 2008, 5(4): 631-632.

 

Hanying Hsueh, Chunglin Hsieh and N.Yu. Computational Modeling of the Interface Effects on the Uniaxial Tensile Behavior of MWCNT-Reinforced Composites. World Journal of Engineering, 2008, 5(4): 633-634.

 

Ling Hu, Diana Hach, Denis Chaumont, Claire-Helene Brachais and Jean-Pierre Couvercelle. Comparison of Various Methods of Grafting of Modifide-peg onto Maghemite Nanoparticles in Aqueous Medium Including Synthesis by Microwave Refluxing. World Journal of Engineering, 2008, 5(4): 635-636.

 

Jin H. Huang, Yucheng Liu and Wenlong Dai. Wave Dispersion In Composite Plates Containing Spheroidal Inclusion. World Journal of Engineering, 2008, 5(4): 637-638.

 

Seung J. Hwang and Sung In Hahn. Microstructure of Fe-Al2O3 Nano Composite Synthesized by High Energy Ball Milling. World Journal of Engineering, 2008, 5(4): 639-640.

 

I.A. Ibrahim, F. A. Harraz, S. M. El-Sheikh and R. M. Mohamedy. Palladium Nanoparticles as a Catalyst for Electroless Copper Deposition on Epoxy and Silicon Substrates. World Journal of Engineering, 2008, 5(4): 641-642.

 

Kong Ing, Sahrim Hj. Ahmad, Mustaffa Hj. Abdullah and Ahmad Nazlim Yusoff. Influence of Γ-Ray Irradiation on Magnetization Behavior of Micron-Sized and Nano-Sized Powders of Magnetite (Fe3O4). World Journal of Engineering, 2008, 5(4): 643-644.

 

T. Jeevananda, Taek Su Lee, Sung Kuk Choi, Gye Hyoung Yoo and Joong Hee Lee. Fabrication of Polypyrrole/MWNT Nanocomposites Using Benzoyl Peroxide as a Novel Oxidizing Agen. World Journal of Engineering, 2008, 5(4): 645-646.

 

X.Y. Ji, H. Li and J.P. Ou. Sensing Properties of Epoxy Resin/Sprayed Carbon Black Conductive Composites. World Journal of Engineering, 2008, 5(4): 647-648.

 

L. Jiang and L.F. Chi. Preparation and Characteration of Au/Polypyrrole Core-Shell Nanoparticles. World Journal of Engineering, 2008, 5(4): 649-650.

 

Norlida Kamarulzaman, M.A. Bustam, N. Blagojevic, M. Elcombe, M. Blackford, M. Avdeev and A.K. Arof. Characterization of Nanocrystalline Materials Using Different Diffraction Techniques. World Journal of Engineering, 2008, 5(4): 651-653.

 

Krishnan Kanny, Yang Shi and P. Jawahar. Optimization of the Processing Parameters of Fiber Reinforced Clay/Epoxy Nanocomposites. World Journal of Engineering, 2008, 5(4): 654-655.

 

Shojiro Komatsu. Photo-Assisted Phase Transformation Method for the Fabrication of Dense-Phase BN Nanostructures. World Journal of Engineering, 2008, 5(4): 656-657.

 

Shiaowei Kuo and Feng-Chih Chang. Self-Assembly Nanostructure of Diblock Copolymer Mixture in Solid and Solution State. World Journal of Engineering, 2008, 5(4): 658-661.

 

Le Quoc Minh, Lam Thi Kieu Giang, Tran Thu Huong, Le Minh Anh Tu, David Hui and Tran Kim Anh. NanoMaterials with Low Dimension Structures from some Lanthanides Hydroxides and Oxides of Y, Tb, Gd, and Eu. World Journal of Engineering, 2008, 5(4): 662-664.

 

Changhee Lee, Yuming Xiong, Sanghoon Yoon and Kyungemox Cho. Tribological Behavior of Nanostructured Composite and Bulk Metallic Glasses APS Coatings. World Journal of Engineering, 2008, 5(4): 665-666.

 

Ben Q. Li, C. Liu and C. Mi. Elecotrmatnetic and Thermal Characteristics of SiO2-Au Nanoshell Composites. World Journal of Engineering, 2008, 5(4): 667-668.

 

X.D. Li, G.Y. Li and H. Wang. Preparation and Properties of Sic nanowires grown on actived carbon particles in a polymer pyrolysis route. World Journal of Engineering, 2008, 5(4): 669-670.

 

Jia Rong Liang, Shih Hao Tseng, Tsung Yen Tsai, Meng Kao Yeh and Nyan Hwa TAI. Synthesis of Carbon Nanotubes and its Applications in Composites and Field Emission Light. World Journal of Engineering, 2008, 5(4): 671-672.

 

Chih Hsiang Lin, Chun Chiang Kuo Kuei Hsien Chen, Li Chyong Chen and Jianqiao Hu Zhe Chuan Feng. Growth and Characteristics of Indium Nitride Nanowires. World Journal of Engineering, 2008, 5(4): 673-674.

 

Y.L.Lu, Liansheng, W. Zhao, Y.P.Wu, Y.K. Liu and L.Q. Zhang. Synthesis of Polymeric Nano-Filler and Its Reinforcement in Elastomer Nanocomposites. World Journal of Engineering, 2008, 5(4): 675-678.

 

Q.P. Luo, B.S. Xu, Y.Z. Yang, L. Jin and X.G. Liu. Modification of Carbon Microspheres with Silver Nanoparticles. World Journal of Engineering, 2008, 5(4): 679-680.

 

P.A. Mahanwar and Vinay Kr. Chaudhary. Waste Styrene Acrylonitrile (SAN)-Mica Composites. World Journal of Engineering, 2008, 5(4): 681-682.

 

Fwulong Mi, Hsingwen Sung and Shuhuei Yu. Effect of Arginine-Chitosan/Poly-Γ-Glutamic Acid Composite Nanoparticles on the Opening of Tight Junction. World Journal of Engineering, 2008, 5(4): 683-684.

 

Andrzej Misiuk, Alexander Ulyashin, Adam Barcz and Jadwiga Bak-Misiuk. Hydrogen Accumulation Within Nano-Structured Areas in Silicon Implanted With Helium and Nitrogen. World Journal of Engineering, 2008, 5(4): 685-686.

 

Aleksander Muc. Identification Methods in the Application to Carbon Nanostructures. World Journal of Engineering, 2008, 5(4): 687-688.

 

Nguyen Vu Giang, Do Quang Tham and Ta Thanh Tinh. Properties of Nanocomposites Based on Linear low Density Poly-ethylene and multi-wall Carbon Nanotubes. World Journal of Engineering, 2008, 5(4): 689-690.

 

G.L. Ning, W. Pan, F. Yan, H.C.g Pang, X.F. Yang and Z.H. Gan. Nano-Technologies Toward Traditional Industrial Processes. Nano-Masking Techniques for Energy-Saving and Waste-Recycling Processes. World Journal of Engineering, 2008, 5(4): 691-692.

 

Tatsuo Okada, Ruiqian Guo , Jun Nishimura, Masato Matsumoto, M. Higashihata and D. Nakamura. Vertically- and Horizontally-Aligned Growth Of Zno Nanowires by Nanoparticle-Assisted Pulsed-Laser Deposition. World Journal of Engineering, 2008, 5(4): 693-694.

 

Hiroo Omi, Daan Sprünken, Kazuaki Furukawa, Hiroshi Nakashima, Ilya Sychugov, Yoshihiro Kobayashi and Keiichi Torimitsu. Determination of Aspect Ratio Distribution of Gold Nanorods from Absorption Spectra using Gans Theory. World Journal of Engineering, 2008, 5(4): 695-696.

 

Zurina Osman, L.Othman and N. Kamarulzaman. Ionic Conductivity, Structural and Morphological Studies of Pmma/SiO2 Nanocomposites. World Journal of Engineering, 2008, 5(4): 697-698.

 

George B. Ouyang. Nano-Structure of Carbon Black Filled Vulcanizates. World Journal of Engineering, 2008, 5(4): 699-700.

 

Nathalie Patterson, Marcus White, Jihua Gou and Xiaoyong Ji. Microcrackingof Carbon Nanofiber-Based Nanocomposites Under Cryogenic/Elevated Temperature Cycling. World Journal of Engineering, 2008, 5(4): 701-702.

 

X. Peng, B. Chen, S. Sun and David Hui. Investigation on nano-helicoid Al Structure of Bittersweet shell. World Journal of Engineering, 2008, 5(4): 703-704.

 

X.H. Peng, B. Chen, G.Z. Quan (Chongqing U., China), David Hui (U. New Orleans) and Shitao Sun. Porous and Fiber-Reinforced Microstructures of Bamboo. World Journal of Engineering, 2008, 5(4): 705-706.

 

Phan Van An, Pham Van Nho and Tran Kim Cuong. Preparation of Nanocrystalline TiO2 Films Sensitized With SnO2. World Journal of Engineering, 2008, 5(4): 707-708. 

 

Jaroslav Purmensky and Karel Matocha. Determination of Nanomaterials Properties by Small Sample Testing Methods. World Journal of Engineering, 2008, 5(4): 709-710.

 

M. Qi, B. Zheng and Y.N. Wang. Deformation Path Simulation in Different Composition Al-Cu Alloy Nanowires by MDs. World Journal of Engineering, 2008, 5(4): 711-712.

 

J. Qiu, G.J. Wang and K.W. Wang. A Novel Approach for Synthesis of Multi-Walled Carbon Nanotubes With a Block Polymer. World Journal of Engineering, 2008, 5(4): 713-714.

 

G.Z. Quan, B. Chen, X.H. Peng, David Hui and S.T. Sun. Parallel Structure of Hydroxyapatite Sheets in Bone. World Journal of Engineering, 2008, 5(4): 715-716.

 

Saleem G. Rao, Ling Huang, Jennifer Murray, Seunghun Hong and Peng Xiong. Assembly of Single-Walled Carbon Nanotubes on Patterns of Au Nanoparticles. World Journal of Engineering, 2008, 5(4): 717-718.

 

Kiminori Sat. Open Space and its Local Atomic Environment in Nano Materials. World Journal of Engineering, 2008, 5(4): 719-721.

 

JaeTae Seo, Jinha Heo, MinJung Kim, Jasmine Austin, Liting Huang, SangWoo Han, WanJoong Kim, WanSoo Yoon, SungSoo Jung, Qiguang Yang, Bagher Tabibi and Doyle Temple. Optical Nonlinearity of Ag Nanoparicles and Nanoprisms. World Journal of Engineering, 2008, 5(4): 722-723.

 

Tae Hee Shim, Jae Sung Park, Hae Jun Lim, Il Han Park and Joong Hee Lee. Properties of Polyaniline/Multi-Walled Carbon Nanotubes Nanocomposites for Bipolar Plate Application of Fuel Cell. World Journal of Engineering, 2008, 5(4): 724-725.

 

Dong H. Shin, J.Y. Cho, S.H. Lee, N.J. Kim and Y.W. Chang. Bulk Nanostructured Metallic Materials Fabricated by Severe Plastic Deformation. World Journal of Engineering, 2008, 5(4): 726-727.

 

B.P.Singh, R.B.Mathur, Ritesh Kumar, Rahul Jangra, Shailaja Pande and T.L.Dhami. Growth of Carbon Nanotubes on Carbon Fiber Cloth and their Application in Epoxy Composites for Mechanical Properties Enhancement. World Journal of Engineering, 2008, 5(4): 728-729.

 

Sara Stolyarova and Y. Nemirovsky. Nanostructured Porous Silicon: Adhesion, Immobilization and Crystallization Promoter for Inorganic and Biomaterials. World Journal of Engineering, 2008, 5(4): 730-733.

 

S.T. Sun, B. Chen, X.H. Peng, David Hui and G.Z. Quan. Investigation on Nano-Helicoidal Structure of Bittersweet Shell. World Journal of Engineering, 2008, 5(4): 734-735.

 

N. Rajmohan and Jerzy A. Szpuna. Texture Development During Annealing in Nanocrystalline Ni and Ni-Fe Electrodeposit. World Journal of Engineering, 2008, 5(4): 736-737.

 

Speranta Tanasescu, Cornelia Marinescu,Florina Teodorescu and Anca Sofronia. The Control of the Energetic Parameters: Important Step in Understanding the Stability and Reactivity of Micro and Nanostructured Materials. World Journal of Engineering, 2008, 5(4): 738-739.

 

Xinrong Teng, Dmitry G. Shchukin and Helmuth Möhwald. Oil loaded multifunction alcomposite nano containers. World Journal of Engineering, 2008, 5(4): 740-741.

 

Francisco Torrens and Gloria Castellano. Cluster nature of  Solvation of Single-wall C Nanohorns. World Journal of Engineering, 2008, 5(4): 742-743.

 

Jialin Tsai and Yi Lieh Cheng. Investigating Silica Nanoparticle Effect on Dynamic and Quasi-Static Compressive Strengths of Glass Fiber/Epoxy Nanocomposites. World Journal of Engineering, 2008, 5(4): 744-745.

 

Tsungyen Tsai, Weichih Chen, Chaoching Wu and Umasankar Ray. Flamability Property of Epoxy/Li-Al Ldh Nanocomposites With Different Aspect Ratio. World Journal of Engineering, 2008, 5(4): 746-747.

 

J.H. Wang, J.W. Ye, Y. Lin and G.L. Ning. Luminescent Properties of Hydrocarbonate-Gel Derived MgSrAl10O17:Eu2+ Blue Phosphor. World Journal of Engineering, 2008, 5(4): 748-749.

 

Stefan Wegrzyn and Lech Znamirowski. Nanoscience and Nanosystems of Informatics. World Journal of Engineering, 2008, 5(4): 750-752.

 

Eyassu Woldesenbet. Nanofoam Sandwich Structured Composites. World Journal of Engineering, 2008, 5(4): 753-754.

 

C.K. Wong, W.S. Tam, Hei Wong and C.W. Kok. Fabrication of Silicon Nanocrystallites by Thermal Annealing of LPCVD Silicon-Rich Silicon Nitride 1025. World Journal of Engineering, 2008, 5(4): 755-756.

 

Ruidong Xu, Junli Wang and Zhongcheng Guo. Effects of Pulse Parameters on Pulse Plating Ni-W-P/CeO2-SiO2 Nano-Composites. World Journal of Engineering, 2008, 5(4): 757-758.

 

Go Yamamoto, Toshiyuki Hashida, Mamoru Omori and Hisamichi Kimura. Toughening and Reinforcing Alumina Matrix Composite With Multi-Walled Carbon Nanotubes. World Journal of Engineering, 2008, 5(4): 759-760.

 

Yoshihiro Yamashitaa, Naoya Aokia, Frank Kob, Hajime Miyakec and Akio Higashiyama. Carbonization Conditions for Electrospun Nanofiber of Polyacylonitrile Copolymer. World Journal of Engineering, 2008, 5(4): 761-762.

 

Xiuchun Yang, Z.W. Dong, Z.H. Li, J.X. Xu and S. X. Qian. Thid-Order Optical Nonlinearity and Ultrafast Response of Cu Nanoparticles in Silicate Glass Fabricated by Ion Exchange. World Journal of Engineering, 2008, 5(4): 763-764.

 

Shu Huei Yu, Shin Shing Shyu, Fwu Long Mi and Chih Kang Peng. Preparation of Chitosan/Gelatin/Nanoapatite Composites. World Journal of Engineering, 2008, 5(4): 765-766.

 

Maria Zaharescu. Sol-Gel Hybrid Nanocomposites With Oxide Nanoparticles. World Journal of Engineering, 2008, 5(4): 767-768.

 

G.J. Zhang and Jose Zimmer. Properies and Application of Glass Ceramics Contained Nano-Crystals. World Journal of Engineering, 2008, 5(4): 769-770.

 

S. Zhang and Cheol Kim. Conductivity of Carbon Nanofiber/Polypyrrole Nanocomposites. World Journal of Engineering, 2008, 5(4): 771-772.

 

Y.D. Zhang and Q.F. Liu. Gas Barrier Properties of Rubber-Kaolin Nanocomposites. World Journal of Engineering, 2008, 5(4): 773-774.

 

W.M. Zhao, M. Li and H.X. Peng. Integration of Polyurethane Into Multi-Walled Carbon Nanotube Sheets by Impregnation. World Journal of Engineering, 2008, 5(4): 775-776.

 

Y.Y. Zhao, Ray L. Frost, Wayde N. Martens and Thor E Bostrom. Synthesis and Characterisation of Y Doped Boehmite Nanofibres. World Journal of Engineering, 2008, 5(4): 777-778.

 

Z.M. Zhao, P. Xiao, Q. Guo, H.F. She and G.Z. Cao. Redox Response of Heavy Metals Ions on Titania Nanotubes Array. World Journal of Engineering, 2008, 5(4): 779-780.

 

H.X. Zheng, J.C. Rao, Janine Pfetzing, Jan Frenzel and Gunther Eggeler. Nanoindentation Induced Stabilized Martensite in Pseudoelastic Ti50Ni48Fe2. World Journal of Engineering, 2008, 5(4): 781-782.

 

Z.F. Zheng, H.W. Liu and H.Y. Zhu. Photocatalytic Activity and Interface Structure of Nanofibers with Mixed Anatase and TiO2(B) Phases. World Journal of Engineering, 2008, 5(4): 783-784.

 

Deng Xu, V. Sridhar, Sung Hyo Lee, Zhen Xiu Zhang and Jin Kuk Kim. Dispersion, Mechanical and Thermal Properties of Nano Graphite Platelets Reinforced Flouroelastomer Composites. World Journal of Engineering, 2008, 5(4): 785-786.

 

OXIDE COMPOSITES

 

Sulaiman Al Mayman, Inas AlNashef, Yousuf Al Zeghayer and Wahid AlMasry. A Nano-Catalyst for the Oxidative Coupling of Methane. World Journal of Engineering, 2008, 5(4): 787-788.

 

Hirofumi Yamasaki, H. Yamada, K. Develos-Bagarinao, J.C. Nie, K. Ohki, Y. Nakagawa and Y. Mawatari. Flux-Pinning Mechanisms In Superconducting YBa2Cu3O7 Thin Films Deduced From Angular Dependent Critical Currents. World Journal of Engineering, 2008, 5(4): 789-790.

 

Khaled Habib and Fathi Al-Sabti. Measurement of Oxide Barrier-Film Thickness and Oxide Porous-Layer Thickness of Anodized Aluminium: Eleectrochemical Impedance Spectroscopy Versus Holographic Interferometry. World Journal of Engineering, 2008, 5(4): 791-792.

 

Haitao Huang, Waiping Suen and Helen L.W. Chan. Multiferroic Solid Solution of BiFeO3 and BiMnO3. World Journal of Engineering, 2008, 5(4): 793-795.

 

Ju Young Park,Tae Min Lim, Poong Gok Hwang, Jong Suk Han and Dongwoon Jung. Prpperties of mtio3 (m= sr, ba) and pbm’o3 (m’=ti, zr) Superlattice Thin Films Fabricated by Laser Ablation. World Journal of Engineering, 2008, 5(4): 796-797.

 

Jindrich Musil. Hard X-ray Amorphous Nitride Ceramics Coatings With Thermal Stability and Oxidation Resistance Above 1000 degC. World Journal of Engineering, 2008, 5(4): 798-799.

 

Hiroyuki Muto, Akihiro Mitani, Kiyofumi Katagiri,Yusuke Daiko, Atsunori Matsuda and Mototsugu Sakai. Homogeneous Coating of Nanopowder on Spherical Ceramic Grain. World Journal of Engineering, 2008, 5(4): 800-801.

 

Thuan Dinh Nguyen and Dong Bok Lee. High Temperature Oxidation Mechanism of Ti3SiC2 in Air. World Journal of Engineering, 2008, 5(4): 802-803.

 

Juyoung Park,Taemin Lim, Poonggok Hwang, Jongsuk Han and Dongwoon Jung. Structure Related Photocatalytic Properties of TiO2. World Journal of Engineering, 2008, 5(4): 804-805.

 

Prado, M. Flores, M.J., Jimenez, R.M. and Reyes-Gonzalez,I.Study of Surfmer of High Molecular Weight: Poly(Ethylene-Oxide Diacrylate) II. Copolymerization With Acrylic Acid. World Journal of Engineering, 2008, 5(4): 806-807.

 

Zahid Rizwan, Azmi Zakaria, Muhammad Aslam and Abdul Hafeez. Effect of Sintering Time on the Photopyroelectric Spectrum of Bi2O3-TiO2-ZnO Ceramics. World Journal of Engineering, 2008, 5(4): 808-809.

 

T. Tsuchiya, T. Nakajima and T. Kumagai. Preparation of Perovskite Manganese Oxide Film by Excimer Laser-Assisted Metal Organic Deposition for Uncooled IR Sensor. World Journal of Engineering, 2008, 5(4): 810-811.

 

X. Xing, L.Liu, D.H. Wang, N.B.Xia, X.Z. Huang and .D. Li. In Situ Synthesis of Magnetic Particles on the Surface of Tetra-Needle-Like ZnO Whisker by Precursor Method. World Journal of Engineering, 2008, 5(4): 812-813.

 

Y.Q. Xu, S.J. LI, Z.L.Wang and S.J. Jin. Investigation of Interfacial Stress in TBCS With Oxidation-Resistance Interlayer. World Journal of Engineering, 2008, 5(4): 814-815.

 

Young Joon Yoon, Jae Chang Park, Hyung-Jun Kim , Hyo Tae Kim, Eun-Hae Koo, Song-Min Nam and Jong-Hee Kim. Growth of Oxide-Based Nanocrystalline Composite Thick Films at Room Temperature. World Journal of Engineering, 2008, 5(4): 816-817.

 

L. Yu, M.Sun, Q.Yu, J. Yu, Z.F. Hao M. Prado, M.J. Flores, Rosa M. Jiménez and I. Reyes-González. Preparation of Manganese Oxide Octahedral Molecular Sieve by Sol-Gel Process. World Journal of Engineering, 2008, 5(4): 818-819.

 

Z.R. Yu and Marriano Aceves-Mijares. Room Temperature Current Oscillation Observed in Si Nanocrystals Embedded in Oxide. World Journal of Engineering, 2008, 5(4): 820-821.

 

D.G. Zhu, H.Y. Tang, J. Guo and H.L. Sun. The Oxidation Mechanism of Ti3SiC2-7molSiC Composites. World Journal of Engineering, 2008, 5(4): 822-823.

 

TEXTILE COMPOSITES

 

Zdzislaw Czaplicki, R. Kozłowski and K. Ruszkowski. The Technology of Flat (Untwisted) Yarns Manufacturing. World Journal of Engineering, 2008, 5(4): 824-825.

 

Hae Kyu Hur and Min Sung Kim. Effective Elastic Constants Of 3-D Orthogonal Woven Textile Composites. World Journal of Engineering, 2008, 5(4): 826-827.

 

Jirí Militky and Dana Křemenakova. Strength Prediction of Rotor Yarns. World Journal of Engineering, 2008, 5(4): 828-829.

 

X.Q. Peng, J. Cao and G. Liu. Forming Simulation of Woven Composites. World Journal of Engineering, 2008, 5(4): 830-831.

 

A.P.S. Sawhney and B. Condon. Development of Cotton-Based Nonwovens. World Journal of Engineering, 2008, 5(4): 832-833.

 

Y. Q. Wang, Y. Shi, A. M. Afsar and J. I. Song. Effects of Fiber Orientations on Dry and Lubricant WearBehavior. World Journal of Engineering, 2008, 5(4): 834-835.

 

Y.J. Wang, Nuray Ucar, Mehmet Ucar and Lillian Wang. Properties of Microcrystalline Cellulose Reinforced Thermoplastic Composite Films. World Journal of Engineering, 2008, 5(4): 836-837.

 

C.Y. Yang. In-Plane Anisotropic Mechanical Properties of Three-Dimensional Angle-Interlock Architectural Composites. World Journal of Engineering, 2008, 5(4): 838-839.

 

L.N. Yao, J.Y. He, W.B. Han, W.B. Zhang and W.J. Li. On Research in Dynamic Behavior of Woven Basalt Fiber Grid Reinforced Concrete. World Journal of Engineering, 2008, 5(4): 840-841.

 

L.B. Zhao, T.L. Qin, H. Huang, J.X. Li, X.Z. Liang and H.F. Chang. Numerical Investigation on Failure Prediction of 3-D P  Joint Composite Woven Structures. World Journal of Engineering, 2008, 5(4): 842-843.

 

ENGINEERING MECHANICS PAPERS 

 

Bui Thi Tuyet Van and Ha Thuc Huy. Biodegradable Poly (Ε-Caprolactone)-Layered Silicate Nanocomposites: The Effect Of Nanofiller Modified By Poly(Ethylene Oxide). World Journal of Engineering, 2008, 5(4): 844-845.

 

Y.L. Chao. The Effect Of Themal Mechanical Coupling On The Microstructure Development In-Brass. World Journal of Engineering, 2008, 5(4): 846-847.

 

C. Guo. Preparation And Properties Of Partial Stabilized Zirconia(Psz) Doped With Calcium Oxide By Microwave Heating. World Journal of Engineering, 2008, 5(4): 848-849.

 

Y.J. Chen. The Modeling Study On Classical Virtual Rolling Laboratory. World Journal of Engineering, 2008, 5(4): 850-851.

 

J.H. Peng. Microwave-Absorbing Characteristics And Temperature Rise Behavior Of Cao-Psz In Microwave Filed. World Journal of Engineering, 2008, 5(4): 852-853.

 

Nguyen Ngoc Linh and Vo Van Hoang. Size Effects on Static and Dynamics Properties of Supercooled Liquid Alumina Nanoparticles. World Journal of Engineering, 2008, 5(4): 854-855.

 

T.C. Qian. Adsorptive Characteristics Of Formaldehyde Onto Modified Activated Carbons Prepared By Microwave-Heating. World Journal of Engineering, 2008, 5(4): 856-857.

 

W.W. Qu. Preparation And Characterization Of Zno-Ac Composite From Spent Catalyst Saturated With Zinc Acetate. World Journal of Engineering, 2008, 5(4): 858-859.

 

Q.N. Shi. The Study On Structure And Orientation Evolution Of UFG Copper Prepared By SD-AARB Method. World Journal of Engineering, 2008, 5(4): 860-861.

 

Son Le Ngoc. The Diamond and Diamond Lovers. World Journal of Engineering, 2008, 5(4): 862-863.

 

R. Wang. The Texture And The Microstructure Development In Cold Mill Warm Rolled 85/15-Brass. World Journal of Engineering, 2008, 5(4): 864-865.

 

Z.X. Yang and Z.D. Dai. The Elytra of the cybister (Dytiscidae):Functional Morphology and Nano-Mechanical Properties. World Journal of Engineering, 2008, 5(4): 866-867.

 

Z.Y. Zhang. Pyrolysis Behaviour And Kinetic Analysis Of Activated Carbon-Based Composites Containing Zinc Acetate. World Journal of Engineering, 2008, 5(4): 868-869.

 

L.X. Zhou. Study On Characteristics Of Activated Carbons Prepared By Microwave-Heating And Its Adsorpion Properties For Vocs. World Journal of Engineering, 2008, 5(4): 870-871.

 

B.M. Chen, Z.C. Guo, X.W. Yang and H. Huang. Investigations on the Properties α -PbO2-Matrix Composite Material. World Journal of Engineering, 2008, 5(4): 872-873.

 

MECHANICS PAPERS

 

Michael P. Anisimov. Qualitative Nanopowder Generation Kinetics. World Journal of Engineering, 2008, 5(4): 874-875.

 

L.V. Bochkareva. Prorerties Computer Modeling of Carbon Nanotubes. World Journal of Engineering, 2008, 5(4): 876-877.

 

Pavel N. Dyachkov. Properties of BN Nanotubes With Isoelectronic Impurities. World Journal of Engineering, 2008, 5(4): 878-879.

 

Evgeny P. Dyachkov. Computer Modeling Interaction of DNA With the Single-Walled Carbon Nanotubes Using. World Journal of Engineering, 2008, 5(4): 880-881.

 

Elena G. Fominykh and M. P. Anisimov. Nanomaterial Generation From Supercritical Vapor-Gas Solutions. World Journal of Engineering, 2008, 5(4): 882-883.

 

Elena G. Fominykh. Computer Algorithm Design for Key Elements of the Nucleation Rate Surfases in Nanotechnology Applications. World Journal of Engineering, 2008, 5(4): 884-885.

 

G.A. Kachurina, S.G. Cherkovaa, R.A.Yankovb and D.V. Marina. Light-Emitting Si Nanostructures Formed in Si Rich SiO2 by Pulsed Annealing. World Journal of Engineering, 2008, 5(4): 886-887.

 

Oleg V. Popkov, G.Yu. Yurkov, Yu.A. Koksharov and A.S. Fionov. Magnetic Nanoparticles Localized on Nanodiamond. World Journal of Engineering, 2008, 5(4): 888-889.

 

Yu.S. Ryabets, N.V. Sorokina and V.G. Antonov. Alteration of Physico-Mechanical Properties of Sealing Composite Materials of New Generation at Influence of Excited Environments, Characteristic for Oil-and-Gas Branch. World Journal of Engineering, 2008, 5(4): 890-891.

 

MATERIALS for ENERGY APPLICATIONS

 

S.L. Ding, Y.Z. Sun, B.H. Xu and Q.F. Liu. Perparatong and Characterization of Rubber /Nano-Clay Composties. World Journal of Engineering, 2008, 5(4): 892-893.

 

Z.C. Du, L.D. Rui and J.J. Zhou. The Research of Carboniferous-Permian Sequence Stratigraphic And Coal Accumulating Law in Xin An Coalfield, Henan Province. World Journal of Engineering, 2008, 5(4): 894-895.

 

J.R. Gao, X.Meng, S.Y. Ma and Q. Meng. The Simulating Research of an Adaptive Fuzzy Pid Controller in the Heating System. World Journal of Engineering, 2008, 5(4): 896-897.

 

B.J. Gong and D.Y. Bai. The Key Technologies of Intelligent Coal Enterprises Integrated Statistical System. World Journal of Engineering, 2008, 5(4): 898-899.

 

Y.B. Guan, H.M. Li, H.L. Song and X.N. Zhang. Equivalent-Material Model Analysis of the Coal Seam Floor Failure Depth in Handan-Xingtai Coal Mine of Hebei. World Journal of Engineering, 2008, 5(4): 9000-901.

 

H.J. He, J.Y. Liu and Y.A. Li. The Application of Embedded Ultrasonic Distance Measurement Technology in the Well Logging Instrument. World Journal of Engineering, 2008, 5(4): 902-903.

 

J.G. Liu. Brake Running on Shearer of Electromagnetic Variable Velocity and Electricity Hauling. World Journal of Engineering, 2008, 5(4): 904-905.

 

W.W. Jiao, Y.Z. Sun and S.C. Zhang. Influences of Deep Fluids on Components of Crude Oil from Jiyang Depressing. World Journal of Engineering, 2008, 5(4): 906-907.

 

J.G. Wang, L.L. Bao and L.G. Kang. CO2 Transcritical Cycle for Ground Source Heat Pump. World Journal of Engineering, 2008, 5(4): 908-909.

 

J.J. Zhou, H.L. Song and X.N. Zhang. The acquisition in coal 3-D seismic seismic exploration. World Journal of Engineering, 2008, 5(4): 910-911.

 

C.R. Lan and Z.Q. Meng. Calculation of Electric Blasting Parameters for Closed Parallel Blasting Circuits. World Journal of Engineering, 2008, 5(4): 912-913.

 

L.Y. Lang and Y. Hong. Attendance Checking System for Coal Mine Based on Face Recognition. World Journal of Engineering, 2008, 5(4):914-915.

 

W.Q. Li, J.C. Wang and W.Q. Meng. Coal Mine Safety Evaluation Model Based on Modified Entropy Weight and Unascertained Measure. World Journal of Engineering, 2008, 5(4): 916-917.

 

W.Q. Li, Y. Zhao and W.Q. Meng. Output Prediction Model in Fully Mechanized Mining Face Based on Support Vector Machine. World Journal of Engineering, 2008, 5(4): 918-919.

 

W.Liao and J.L. Wang. Vibration Character of the Multi-cords Rub Hoist. World Journal of Engineering, 2008, 5(4): 920-921.

 

X.H. Liu, L.H. Zhang, L. Chen, L.T. Tian and S.L. Cui. Optimum Design of Dusting and Water Flooding Light Sublevel Caving Face. World Journal of Engineering, 2008, 5(4): 922-923.

 

L.H. Ma, W.Q. Li and H.Z. Yan. Environment Evaluation of Mining Area Based on Unascertained Measure and Ahm. World Journal of Engineering, 2008, 5(4): 924-925.

 

W.Q. Meng, Y.X. Li, H.L. Cui and Y.P. Zhang. Experimental Study on Compressive Strength of Non-fired and Non-sintering Modified Waste Ash BrickMasonry. World Journal of Engineering, 2008, 5(4): 926-927.

 

Y.Z. Sun, S.J. Qin, H.W. Yao and C.L. Shi. Production and Comparative Analyses of Biodiesels from Vegetable Oils. World Journal of Engineering, 2008, 5(4): 928-929.

 

Q.S. Li, B. Gang, H.T. Cui, D.C. Yin and R.Z. Dong. Combined Hydraulic Support of Suspension Roof Timber. World Journal of Engineering, 2008, 5(4): 930-931.

 

J.H. Ren, W. Wang and L.Q. Niu. The Technology of Increasing Bulk Density and Granulation of Methyl Cellulose. World Journal of Engineering, 2008, 5(4): 932-933.

 

S.H. Wang. Nanostructure Formed by Phase Separation of Fcc-Al from Eutectic Crystallization in the Al-Ni Based Metallic Glass. World Journal of Engineering, 2008, 5(4): 934-935.

 

S.F. Li, K.K.Jin and X.C. Lu. The Law of Copper Deposits Base on Characteristic of Apparent resistivity on Alagtaihert Al in Mongolia. World Journal of Engineering, 2008, 5(4): 936-937.

 

G.M. Wang, Q.D. Wang and J.F. Wei. Performance Optimization and Improvement of Main Fan for Coal Mine Based on Spraying Technology. World Journal of Engineering, 2008, 5(4): 938-939.

 

Q.D. Wang, J.F. Wei and J. Mi. The Development of Intelligent Temperature Control Device Underground Coal Mine Base on 51MCU. World Journal of Engineering, 2008, 5(4): 940-941.

 

S.J. Wang, Z.Q. Meng, J.X. Wang and M.Y. Lin. Image Generation about Icp-ms Experimental Correlative Data. World Journal of Engineering, 2008, 5(4): 942-943.

 

X.G. Wang, Z.X. Hao and W. Lu. Optical Fiber Strain Sensors Used in Coal Mine Architecture. World Journal of Engineering, 2008, 5(4): 944-945.

 

Y.G. Wang, B.Q. Zhao and B. Li. Research on Preparation of Potassium Alum from Illite. World Journal of Engineering, 2008, 5(4): 946-947.

 

X.L. Wei, X. Liu and K. Wang. The Mine Pneumatic Pump Robust Design Based on Response Surface Methodology. World Journal of Engineering, 2008, 5(4): 948-949.

 

X.L. Wei, J.H. Ren and X. Liu. The Reliability Assessment of Coal Mine Scraper Conveyer Flight Link. World Journal of Engineering, 2008, 5(4): 950-951.

 

H.M. Yang. The Comprehensive Mechnical Mining Technlolgy of Thin Coal-Seam under the Complex Geological Condition. World Journal of Engineering, 2008, 5(4): 952-953.

 

B.S. Yang and W. Lian. Research on Numerical Simulation of Mining Subsidence Under Rail-way in Guo Er-Zhuang Mine. World Journal of Engineering, 2008, 5(4): 954-955.

 

Y.Q. Zhang and W. Zhang. The Design and Implementation of Real-Time Coal Mine Safety Monitoring System. World Journal of Engineering, 2008, 5(4): 956-957.

 

Y.Q. Zhang, L.L. Wu and J.G. Zhao. The Forecasting Of Gas Content Based on Genetic Programming. World Journal of Engineering, 2008, 5(4): 958-959.

 

A.B. Zhang, X.X. Liu, X.P.Li and W.J. Di. Analysis of Chaotic Character of the Earth’s Surface Subsidence Caused by Mining. World Journal of Engineering, 2008, 5(4): 960-961.

 

J.K. Zhang and Z.Q. Meng. Verifying Measure Data of Tunnel Distortion with VB. World Journal of Engineering, 2008, 5(4): 962-963.

 

Z.H. Zhang, P.L. Pang and X.J. Lou. A Numerical Method for Determining the Elgenvalues and Elgenvectors of a Hermitian Matrix in the Real Operation. World Journal of Engineering, 2008, 5(4): 964-965.

 

X.Z. An, C. Yi, R.X. Du and H.Y. Tian. Experimental Study on Damage Mechanism of RC Beam in Coal Mining Areas. World Journal of Engineering, 2008, 5(4): 966-967.

 

F.Q. Bai, L.G. Yang, J.G. Su and Y.Z. Xu. The Research of Depth of Floor Break at The First Work Face Front of Coal Seam 9 in Gedong Mine. World Journal of Engineering, 2008, 5(4): 968-969.

 

Hua Liu Aili Qin Huanzhen Zhang. Performance Improvement of Condition Monitoring Induction Motor Based on Wavelet Transformation. World Journal of Engineering, 2008, 5(4): 970-971.

 

Y.J. Xu, D.H. Tu, L.L.Wang and Z.W. Zhang. Steady Thermal Stresses in Ceramic-FGM-Metal Composite ECBF Plate with Temperature-dependent Material Properties under Convective Heat Transfer Boundary. World Journal of Engineering, 2008, 5(4): 972-973.

 

Y.J. Xu, D.H. Tu, W. Wei and X.L.Zhou. Steady Thermal Stresses in Ceramic-FGM-Metal Three-Layered Composite Plate under ECBF Mechenical Boundary. World Journal of Engineering, 2008, 5(4): 974-975.

 

Y.Z. Sun, J.W. Liu and C.Y. Liu. Geochemical Characteristics of Different Natural Gas Migration Zones in the Ordos Basin China. World Journal of Engineering, 2008, 5(4): 976-977.

 

H.C. Yao, F.W. Zhang, Y.C. Ma and Y.Z. Sun. Impact of Coal Mining Subsidence on Soil Quality and Some Protecting Technique for the Soil Quality. World Journal of Engineering, 2008, 5(4): 978-979.

 

H.G, Zhao, C.Y. Liu and L.P, Yue. Structural Reverse and its Significance to Oil and Gas in the East and West of Ordos Block in Neogene. World Journal of Engineering, 2008, 5(4): 980-981.

 

S.L.Ding, Y.Z. Sun, Q.F. Liu and Y. Cuina. Perparatong and Characterization of Nano-Kaolinite. World Journal of Engineering, 2008, 5(4): 982-983.

 

S.L. Ding, Q.F. Liu, Y.Z. Sun and M.Z. Wang. Kaolinite in Coal Seams of Permo-Carboniferous, North China. World Journal of Engineering, 2008, 5(4): 984-985.

 

M.X. He, W. Wang and J. Yan. The Smart Battery Monitor for Safety Lamp Based on Impedance Track Gas Gauge. World Journal of Engineering, 2008, 5(4): 986-988.

 

R.S. Hou, Y.M. Yang, W.M. Zhang and .J. Yang. The Research on Numerical Simulation of the Centrifugal Pump and Configuration Perfected. World Journal of Engineering, 2008, 5(4): 989-990.

 

Q.P. Hu, H.J. Gao, Y.G. Yan and X.H. Wang. State Space Methods for Second Order Analysis of Frame-Shear Wall Structures. World Journal of Engineering, 2008, 5(4): 991-992.

 

X.W. Li, R.X. Zhang, L. Li and X.J. Lv. The Classification of Surface Mine and Analysis of Mining Technology Mode in China. World Journal of Engineering, 2008, 5(4): 993-994.

 

X.Z. Liang, W. Hou and J.L. Wei. Filling in the strata of the Geological Structure and Characteristics of Disaster Prevention. World Journal of Engineering, 2008, 5(4): 995-996.

 

H. Liu, S.L. Kang, W. Liao and S.H. Shen. Temperature Monitoring for Asynchronous Motor Based on Wavelet Network and Parameter Identification. World Journal of Engineering, 2008, 5(4): 997-998.

 

H.Y. Wang, R. Han, X.F. Song and Y. Wang. Digital Holographic Microscopy for Nanoscale Three-Dimensional Imaging and Measurement. World Journal of Engineering, 2008, 5(4): 999-1000.

 

B.L. Wu, L.Hu, C. Liu and X.W. Qiu. Petrology Characteristics of green alteration sandstone in Dongsheng deposit and its genesis research. World Journal of Engineering, 2008, 5(4): 1001-1001.

 

B.L. Wu, L. Hu and X.W. Qiu. Characteristics of Nature Gas Leakage and the alteration effects in the northeast of Ordos Basin. World Journal of Engineering, 2008, 5(4): 1002-1003.

 

B.S.Wu, J.J. Jiang, T.L. Liu and Z.W. Tian. The Design and Study of On-Line Detection System about Hydraulic Control Valve Based on Fix Software. World Journal of Engineering, 2008, 5(4): 1004-1005.

 

Y.C. Yang, Z.B. Cheng and B. Yin. Experimental Study on the Steady-State Methane Gas Diffusion in Gob. World Journal of Engineering, 2008, 5(4): 1006-1007.

 

H.D. Ye, L. Qiao, L.J. Kuang and X.Z. An. Application and Research of Steel Slag and Coal-Dust Ash in Comosite Foundation of Rammed Cast-in Situ Pile. World Journal of Engineering, 2008, 5(4): 1008-1009.

 

Y.H. Zhang and Z.A. Huang. Improving the Methane Pumpage Efficiency with the WaterPressure Blasting in the Hole Drilling through Coal Beds <0}. World Journal of Engineering, 2008, 5(4): 1010-1012.

 

L.Y. Zheng, L.X. Zhao, L.Q. Niu and T.L. Liu. Secondary Hardening of Low Alloyed High Speed Steel W4MoCr4VSiN. World Journal of Engineering, 2008, 5(4): 1013-1014.

 

 

2009 1-2

 

No.1

 

C.P. Wong, W. Lin, L. Zhu, H. Jiang, R. Zhang and Y. Li., K. Moon. Nano materials for microelectronic and photonic packaging. World Journal of Engineering, 2009, 6(1): 1-4.

 

R. Weng, L.M. Zhang, C.H. Wang and S.P. Wang. Structure and characterization of perfluorinated octyl silane materials. World Journal of Engineering, 2009, 6(1): 5-8.

 

S.H. Ahmad, N.A. Hassan, R. Rasid and S.N. Surip. Thermoplastic natural rubber based nanocomposites. World Journal of Engineering, 2009, 6(1): 9-13.

 

H. Benabid and M.F. Ghorab Cadmium as an environmental pollutant study of evolution of cadmium, its effects on beans (phaseolus vulgaris) and its interaction with zinc World Journal of Engineering, 2009, 6(1): 14-16.

 

Y.Q.Wang, H.D.Kwon, S.T. Kim, A.M. Afsar and J.I. SongTaguchi method to optimize brazing conditions for copper and ASTM A501 steel World Journal of Engineering, 2009, 6(1): 17-19.

 

G.L. Tan and X.F. Yu. Synthesis of the compositing CdS nanorods and nanoparticles. World Journal of Engineering, 2009, 6(1): 20-25.

 

David and P.K. Dutta. Degradation mechanism of the balsa wood core composite sandwich beam from heating from one side. World Journal of Engineering, 2009, 6(1): 26-33.

 

D. Hui and P.K. Dutta High-strain-rate fracture toughness of delamination in polymer composite interphase. World Journal of Engineering, 2009, 6(1): 34-48.

 

D. Hui and P.K. Dutta Comparision of fatigue behavior of concrete and FRP composite bridge decks World Journal of Engineering 2009, 6(1): 49-56.

 

S. Malahat, P.G. Iovenitti and I. Sbarski. Fabrication and characterization of hot embossed polymer microfluidic chips for ESI-MS World Journal of Engineering, 2009, 6(1): 57-63.

 

Y.Q. Wang, F.A. Mirza, A.M. Afsar and J. I. Song. Optimization of brazing parameters for copper and ASTM A501 steel using Taguchi method. World Journal of Engineering, 2009, 6(1): 64-69.

 

A.M. Afsar, R. Rahman1, F. A. Mirza and J.I. Song. Elastic solution of stresses and strains in an FGM rectangular plate by finite difference method. World Journal of Engineering, 2009, 6(1): 70-76.

 

Y. Shi, Y.Q. Wang, F. A. Mirza, A. M. Afsar and J. I. Song. Low velocity impact investigation of aluminum honeycomb sandwinch panels. World Journal of Engineering, 2009, 6(1): 77-83.

 

Y.Q. Wang, A.M. Afsar, F.A. Mirza and J.I. Song. Dry and lubricant wear behaviors of Al2O3f/SiCp hybrid metal matrix composites World Journal of Engineering, 2009, 6(1): 84-90.

 

J. H. Peng, S. H. Guo, G. Chen, L. B. Zhang, J. L. Mao and S. M. Zhang. Pilot-scale experrimental study on the new technology of cao-psz by micriowave heating World Journal of Engineering, 2009, 6(1): 91-96.

 

S. Z. Wu, Y. G. Wang, J. Yi, J. E. Mark and L. Q. Zhang. Effect of Structural Features and Temperature on Diffusion Selectivity of O2vs. N2 in Ethylene-1-hexene Copolymer. World Journal of Engineering, 2009, 6(1): 97-99.

 

Charles Lucian. Spatial Variability of Expansive Soil Properties at Different Scales Within Kibaha, Tanzania. World Journal of Engineering, 2009, 6(1): 100-106.

 

HJSahrim Ahmad, N. A. Hassan, R. Rasid and S. N. Surip. Thermoplastic natural rubber based nanocomposites. World Journal of Engineering, 2009, 6(1): 107-111.

 

Y. Q. Wang, A. M. Afsar, and J. I. Song. Effects of fiber orientations on dry and lubricant wear behaviors. World Journal of Engineering, 2009, 6(1): 112-114.

 

R. Weng L. M. Zhang C. H. Wang and S. P. Wang. The structure and characterization of perfluorinatedoctyl Silane materials World Journal of Engineering, 2009, 6(1): 115-118.

 

C.E. Orozco. Strain limits vs reinforcement ratio limits and collection of formulas and ideas for the analysis and design of reinforced concrete flexural members. World Journal of Engineering, 2009, 6(1): 119-129.

 

H. F. ZhaoL. Wang, A. G. Xie, B. Liu, Q. F. Li, X. X.Tan, T. L. Hung and H. Y. Wu. On the effect of heat-treatment on the corrosion-resistance of rapid-quenched zinc alloy containing Mg and Pb. World Journal of Engineering, 2009, 6(1): 130-132.

 

X.K. Chen, Q. Zhang, G.Q. Zhang and W. Yang. Effect of Al2O3 coating on thepreperties of NANO-TiO2. World Journal of Engineering, 2009, 6(1): 133-135.

 

L.P. Zeng, Q. Zhang, D.L.He and C. Xu. Kinetics study onmineralization of hydroxyapatite/chitosan composite a simulated body fluid. World Journal of Engineering, 2009, 6(1): 136-138.

 

S.J. Qin, Y.Z. Sun, H.W. Yao, L.C. Shi and S.X. Zhang. Homogeneous production of biodiesels from vegetable oils. World Journal of Engineering, 2009, 6(1): 139-142.

 

K. V. Sharma and C. Yuvaraja C. Characterization of Al/Al2O3 MMCS for wear properties. World Journal of Engineering, 2009, 6(1): 143-145.

 

M. Oshikiri, M. Boero, A. Matsushita1 and J. Ye. Detailed adsorption properties of water molecule on the surface of YVO4 photo-catalyst investegated by first principles theoretical approach. World Journal of Engineering, 2009, 6(1): 146-148.

 

M. Ghouse, Y. Al-Yousef, A. Al-Musa and M.F. Al-Otaibi. Preparation of La0.7Ca0.3CrO3 Nano Ceramic Powders by Sol-Gel process for Solid Oxide Fuel Cell (SOFC) Application. World Journal of Engineering, 2009, 6(1): 149-155.

 

Z. Crnjak Orel, M. Bitenc, P. Podbršček, M. A. Cleveland, J. A. Paramo, R. M. Peters and Y. M. Strzhemechny. Preparation characterization of ZnO and correlation between their morphology and defect luminescence. World Journal of Engineering, 2009, 6(1): 156-160.

 

S.J. Wang, Z.Q. Meng and M.Y. Lin. Image generation of correlative data in ICP-MS experiment. World Journal of Engineering, 2009, 6(1): 161-164.

 

F.Q. Bai, L.G. Yang, J.G. Su and Y.Z. Xu. The research of depth of floor break at the first work face front of Coal Seam 9 in Gedong mine. World Journal of Engineering, 2009, 6(1): 165-167.

 

J.K. Zhang, Z.Q. Meng and M.Y. Lin. Verifying Measure Data of Tunnel Distortion With VB. World Journal of Engineering, 2009, 6(1): 168-169.

 

W.W. Jiao, S.C. Zhang and Y.Z. Sun. Geochemical characteristics of source rocks from jiyang depression. World Journal of Engineering, 2009, 6(1): 170-173.

 

Y.Z. Sun and C.Y. Liu. Concomitance of petroleum, coal, nature gas and uranium in the ordos basin, China. World Journal of Engineering, 2009, 6(1): 174-179.

 

X.Z. An, C.Yi, R. Du and H.Y. Tian. Analisis on damage law and characteristic parameters of RC beams in coal mining areas. World Journal of Engineering, 2009, 6(1): 180-184.

 

B.J. Gong, D.Y. Bai and J. Han. The key technologies of intelligent coal enterprises integrated statical system. World Journal of Engineering, 2009, 6(1): 185-189.

 

R.S. Hou, Y.M. Yang, W.M. Zhang and L.J. Yang. Numerical simulation of the centrifugal pump and configuration perfected. World Journal of Engineering, 2009, 6(1): 190-197.

 

Q.P. HuH.J. Gao, Y.G. Yan and X.H. Wang. State space methods for second order analysis of frame- shear wall structures. World Journal of Engineering, 2009, 6(1): 198-200.

 

C.R. Lan and Z.Q. Meng. Caculation of electric blasting parameters for closed parallel blasting circuits. World Journal of Engineering, 2009, 6(1): 201-204.

 

S.F. LiK.K. Jin and X.C. Lu. On the distributing law of copper mines based on the characteristics of apparent resistivity at Alagtaihert Al in Mongolia. World Journal of Engineering, 2009, 6(1): 205-210.

 

W.Q. LiJ.C. WangW.Q. Meng. Coal mines safety evaluation model based on modified entropy weight and unascertained measure. World Journal of Engineering, 2009, 6(1): 211-215.

 

W.Q. Li, Y. Zhao and W.Q. Meng. Output prediction model in fully mechanized mining face based on support vector machine. World Journal of Engineering, 2009, 6(1): 216-221.

 

X.W. Li, R.X. Zhang, L. Li and X.J. Lu. The classification of surface mine and analysis of mining technology mode in China. World Journal of Engineering, 2009, 6(1): 222-224.

 

H. Liu, S.L. Kang, W. Liao and S.H. Shen. Temperature monitoring for asynchronous motor based on wavelet network and parameter identification. World Journal of Engineering, 2009, 6(1): 225-231.

 

J.G. Liu. A research on the braking operation of the coal shearer with electromagnetic speed control and electric haulage. World Journal of Engineering, 2009, 6(1): 232-239.

 

X.H. Liu, L.H. Zhang, X.J.Lv, L.Chen, L.T. Tian and S.L. Cui. Optimum design of dusting and water flooding in light sublevel caving face. World Journal of Engineering, 2009, 6(1): 240-242.

 

L.h. Ma, W.q. Li and H.Z. Yan. Environment evaluation of mining area based on unascereained measure and ahm. World Journal of Engineering, 2009, 6(1): 243-246.

 

W.Q. Meng, Y.X. Li, H.L. Cui and Y.P. Zhang. Experimental study on compressive strength of non-fired and non-sintering modified waste ash brick masonry. World Journal of Engineering, 2009, 6(1): 247-251.

G.M. Wang, Q.D. Wang and J.F. Wei. Performance optimization and improvement of main fan for coal mine based on spraying technology. World Journal of Engineering, 2009, 6(1): 252-255.

 

J. G. Wang, L.L. Bao and L.G. Kang. CO2 transcritical cycle for ground source heat pump. World Journal of Engineering, 2009, 6(1): 256-260.

 

Q.D. Wang, J.F. Wei and L.J. Yang. The Development of intelligent temperature control device underground coal mine base on 51 MCU. World Journal of Engineering, 2009, 6(1): 261-266.

 

S. H. Wang and J. Mi. Nanostructure formed by phase separation of fcc-Al from eutectic crystallization in the Al-Ni based metallic glass. World Journal of Engineering, 2009, 6(1): 267-271.

 

Y.G. Wang, B.Q. Zhao and B. Li. Preparation of potassium alum from illite. World Journal of Engineering, 2009, 6(1): 272-274.

 

X. L. Wei, X. Liu and K. Wang. Robust design of the mine pneumatic pump based on response surface methodology. World Journal of Engineering, 2009, 6(1): 275-279.

 

B. S. Wu, J.J. Jiang, T.L. Liu and Z.W. Tian. The design and study of on-line detection system about hydraulic control valve based on FIX software. World Journal of Engineering, 2009, 6(1): 280-286.

 

Y. j. Xu, D. h. Tu, L. L. Wang and Z. W. Zhang. Steady thermal stresses in ceramic-fgm metal composite Efbfplate with temperature-dependent material properties under convectice heat transfer boundary. World Journal of Engineering, 2009, 6(1): 287-294.

 

B.S. Yang, M.Z. Zhao, C.W. Zhang, X. X. Wei and J.P. Shang. The reseach and application of rorary mining technology in fully-face. World Journal of Engineering, 2009, 6(1): 295-298.

 

A.B. Zhang, H.X. Liu, H. Liu and X.P. Li. A new artificial neural network model of mine subsided prediction based on disposed data. World Journal of Engineering, 2009, 6(1): 299-303.

 

Y.H. Zhang and Z. Huang. Improving the methane pumpage efficiency with the water pressure blasting in the hole drilling through coal beds. World Journal of Engineering, 2009, 6(1): 304-307.

 

Y.Q. Zhang, W. Wu and S.J. Wang. The application of the zigbee communication technology to mining Person tracking system. World Journal of Engineering, 2009, 6(1): 308-312.

 

Y.Q. Zhang, W.Zhang and W.Wu. Taguchi method to optimize brazing conditions for copper and ASTM A501 steel. World Journal of Engineering, 2009, 6(1): 3013-317.

 

Z.H. Zhang and P.L. Pang. A numerical method for determining the eigenvalues and eigenvector of a hermitian matrix in the real operation. World Journal of Engineering, 2009, 6(1): 318-321.

 

L.Y. Zheng, L.X. Zhao, L.Q. Niu and T.L. Liu. Secondary hardening of low alloyed hing speed steel W4Mo3Cr4VSiN. World Journal of Engineering, 2009, 6(1): 322-325.

 

 No.2

 

S.L. Ding, Q.F. Liu, Y.Z. Sun and B.H. Xu. The kaolinite rock in coal bearing stratum, China. World Journal of Engineering, 2009, 6(2):1-6.

 

Y.B. Guan, H.M. Li, H.L. Song and X.N. Zhang. Equivalent-material model analysis of the coal seam floor failure depth in Handan-Xingta coal mines, China. World Journal of Engineering, 2009, 6(2):7-10.

 

H.M. Yang. The comprehensive mechnical mining technology of thin coal-seam under the complex geological condition. World Journal of Engineering, 2009, 6(2):11-15.

 

Y.C. Yang, Z.B. Cheng and B. Yin. Experimental study on the steady-state methane gas diffusion in gob. World Journal of Engineering, 2009, 6(2):16-19.

 

A.B. Zhang, X.X. Liu, X.P. Li and W.J. Di. Analysis of chaofic character of the earths surface subsidence caused by mining. World Journal of Engineering, 2009, 6(2):20-24.

 

B.S. Yang, M.Liang, C.D. Sun and C.G. Zhang. The application of the reciprocating mining technology.World Journal of Engineering, 2009, 6(2):25-29.

 

H.T. Cui. Optimize framework of canopy for hydraulic support based on the Random Ray Method. World Journal of Engineering, 2009, 6(2):30-33.

 

H.D. Ye, L. Qiao, L.J. Kuang and X.Z. An. Application and research of steel slag and coal-dust as in composite foundation of rammed cast-in situpile. World Journal of Engineering, 2009, 6(2):34-40.

 

X.Z. Liang and W. Hou. Geological characteristics of filling structures in coal formatios of Handan Coalfield. World Journal of Engineering, 2009, 6(2):41-46.

 

J.R. Gao, X. Meng, S.Y. Ma and Q. Meng. The simulation research of an adaptive fuzzy PID controller in heating systems control. World Journal of Engineering, 2009, 6(2):47-50.

 

M.X. He, W. Wang and J. Yan. The smart battery monitor for safety lamp based on impedance track gas gauge. World Journal of Engineering, 2009, 6(2):51-54.

 

L.Y. Lang and Y. Hong. Checking attendance system for safety lamp based on face recognition. World Journal of Engineering, 2009, 6(2):55-58.

 

L.Y. Lang and X.F. Zhang. Research of recognition technology for coal gangues based on image processing. World Journal of Engineering, 2009, 6(2):59-61.

 

Q.S. Li, G. Bian, H.T. Cui, D.C. Yin and R.Z. Dong. Combined hydraulic support of suspension roof timber. World Journal of Engineering, 2009, 6(2):62-65

 

W. Liao, J.L. Wang and X. Liu. Vibration character of the multi-cords rub hoist. World Journal of Engineering, 2009, 6(2):66-70.

 

J.H. Ren, W. Wang and L.Q. Niu. Technology of increasing bulk density and granulation of methylcellulose. World Journal of Engineering, 2009, 6(2):71-75.

 

X.G. Wang, Z.X. Hao and L.Wen. Study of optical fiber strain sensors used in coal mine architecture. World Journal of Engineering, 2009, 6(2):76-78.

 

X.L. Wei, J.H. Ren and X. Liu. The reliability assessment of coal mine scraper conveyer flight link. World Journal of Engineering, 2009, 6(2):79-83.

 

W.Q. Meng, Y.X. Li, H.L. Cui and Y.P. Zhang. Experimental study on compressive strength of non-fired and non-sintering modified

waste ash brick masonry. World Journal of Engineering, 2009, 6(2):84-88.

 

Y.J. Xu, D.H. Tu, L.L. Wang and Z.W. Zhang. Steady thermal stresses in ceramic-fgm metal composite Efbfplate with temperature-dependent material properties under convectice heat transfer boundary. World Journal of Engineering, 2009, 6(2):89-95.

 

X.Y. Tang. Pure bending analysis of a natural fiber composite beam. World Journal of Engineering, 2009, 6(2):96-98.

                                                                                       

 

 



《World Journal Of Engineering》
Hebei University of Engineering, Guangming South Street 199, Handan, Hebei, China ,Zip Code: 056038
Tel: 86-310-7429124 ; Fax: 86-310-6025698; 

          E-mail: manuscript@wjoe.org; suscription@wjoe.org; support@wjoe.org  http://www.wjoe.org